Here is an old net.cfg used with Netware and ODI for IP support:
Protocol IpxOdi
Ipx Sockets = 32
link driver 3c509
int 10
port 300
frame ethernet_802.3
frame ethernet_ii
frame ethernet_802.2
frame ethernet_snap
protocol ipx 0 ethernet_802.3
netware dos requester
first netware drive = n
preferred service=sct
Barry
Sean Roe wrote:
> Hi All,
>
> I was woundering if anybody has any experience making a strictly DOS
> workstation work in a Masq network. I have an old 386 at home that my kids
> use. They want to use the Arachne web browser but it uses something called
> odipkt and lsl (I think its the same lsl the Novell uses). I am at my wits
> end I cant make it work. I have the lsl loading, the driver for the pcmcia
> card, and then the odipkt driver. I start the browser,and it sees the odipkt
> driver, but it can never find any websites. Anyway I think that there is a
> cfg file I need to get setup (net.cfg?) any ideas would be great.
>
> TIA,
> Sean
>
> Sean Roe [EMAIL PROTECTED]
> Come see us on the Web:
> http://www.desertdocs.com
>
> _______________________________________________
> Masq maillist - [EMAIL PROTECTED]
> http://tiffany.indyramp.com/mailman/listinfo/masq
> Admin requests can be handled by web (above) or [EMAIL PROTECTED]
_______________________________________________
Masq maillist - [EMAIL PROTECTED]
http://tiffany.indyramp.com/mailman/listinfo/masq
Admin requests can be handled by web (above) or [EMAIL PROTECTED]
