Hi All
I have run into a bit of a problem with IPMasq and DNS. Our setup looks
somethin like this:
DMZ
Mail Server-------|
|
Web
Server-------|-------------Cisco---------INTERNET
LAN | Router
Workstations--------------IPmasq------------|
(soon to be DNS server)
I am working on setting up our DNS to run off the IPMasq box for both
internal and internet traffic
The Cisco is doing NAT translation from real IP addresses to DMZ address.
The only way I can seem to get to the web server is if I telnet to the NAT
(Non routable) address.
I cannot seem to telnet to the webserver with the Internet IP address from
inside the lan.
The problem I am having is if I setup the DNS to use the real address I
can't get to it from inside the network, internet is fine. So I think my
issue is Zones. One for internal address and one for internet address. I
am not sure how to do this. I looked in the DNS Howto but it is not very
clear. Any sites or insigts you could share would be great
TIA,
Sean
Sean Roe [EMAIL PROTECTED]
Come see us on the Web:
http://www.desertdocs.com
_______________________________________________
Masq maillist - [EMAIL PROTECTED]
http://tiffany.indyramp.com/mailman/listinfo/masq
Admin requests can be handled by web (above) or [EMAIL PROTECTED]
