/* HINT: Search archives @ http://www.indyramp.com/masq/ before posting! */ Hello All, I am sorry if this question has been asked, but I am new to the list and am having lots of problems using IP masq on a linux 2.2.10 box. The problem is that the machine will randomly fail to make a complete session. My network is connected to the internet via cable modem, and it also connects to some other machines via dedicated 56k line. So for internet connectivity I put a linux machine with 2 nics between the internet and my network as the Internet gateway using masq, and added the routes to the routing table to send packets though the 56k line in the event that a client needs to talk to the other machines. About one out of every 5 times I try and send a packet to the internet or the co-located machines I get a TCP error stating the the connection was reset by the peer. Other than that everything works fine. If I change my default gateway on my client machine to go to the 56k line router everything works fine all the time, but I don't get internet though the cable modem. It should be noted that all of the machines on the network have real internet IP addresses because internet is available though the 56k line, however it is much slower. So basically I want to make my linux machine route internet bound packets though masq and a cable modem, and co-lo bound packets to the local 56k line router. Thanks for any help you can send. schu _______________________________________________ Masq maillist - [EMAIL PROTECTED] Admin requests can be handled at http://www.indyramp.com/masq-list/ or email to [EMAIL PROTECTED] PLEASE read the HOWTO and search the archives before posting. You can start your search at http://www.indyramp.com/masq/ Please keep general linux/unix/pc/internet questions off the list.
