The clean build and install worked! (I'm sorry I couldn't get it to work
before--I must not have cleaned it properly.) It's running without any
problems. Thank you very much!
Hani
On Thu, Jan 15, 2009 at 1:09 PM, John Hunter <jdh2...@gmail.com> wrote:
> On Mon, Jan 12, 2009 at 9:35 AM, Hani Nakhoul <nakh...@gmail.com> wrote:
> > I did use sudo--here are the shell command and the install output:
> >
> > sudo python setup.py install
>
> Please try doing a clean build and install following the instructions at
>
> http://matplotlib.sourceforge.net/faq/installing_faq.html#source-install
>
> Basically do the following
>
> > sudo rm -rf build
> > sudo rm -rf /usr/lib/python2.5/site-packages/mpl_toolkits
> /usr/lib/python2.5/site-packages/matplotlib*
> > python setup.py build > build.out
> > sudo python setup.py install > install.out
>
> and attach both build.out and install.out in your followup email.
>
> Good luck!
> JDH
>
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Matplotlib-users mailing list
Matplotlib-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/matplotlib-users
