Matlplotlib folks,
I copied the demo_curvelinear_grid.py example and noticed when using the
curvelinear_test2
and plotting a line that had more than 100 points that the resulting line
doesn't plot as expected.
For example:
Replacing
ax2.plot(intp(np.array([0, 30]), 50),
intp(np.array([10., 10.]), 50))
with
ax2.plot(range(150),[10.]*150,color='g')
ax2.plot(range(100),[5.]*100,color='r')
Shows my problem. The red line with 100 points plots just fine and as
expected. The green line with 150 points doesn't make any sense to me (I've
attached the output plot). The line plots at the right radial value, but goes
from 0 degrees to what looks like 14 degrees instead of 150 degrees.
Is there anything in the example code or in some of the code that limits the
number of points to 100?
Thanks,
Sara
Software Versions:
Python : 2.6.5
matplotlib.__version__ = '1.0.0'
-------------------------------------------------------------------
Sara Jean Hatch
Inner Planet Mission Analysis Group
Guidance, Navigation, & Control Section
NASA - Jet Propulsion Laboratory
4800 Oak Grove Drive
M/S: 301-150
Pasadena, CA 91109
Phone: (818) 354-8723
-------------------------------------------------------------------
<<attachment: 100vs150pts.png>>
------------------------------------------------------------------------------ What You Don't Know About Data Connectivity CAN Hurt You This paper provides an overview of data connectivity, details its effect on application quality, and explores various alternative solutions. http://p.sf.net/sfu/progress-d2d
_______________________________________________ Matplotlib-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/matplotlib-users
