fullJac is a flag that you can set to either access the full Jacobian matrix or a partial Jacobian. With fullJac = 1, the routine returns the full Jacobian that has partial derivatives of the power flow equations w.r.t to the voltage magnitudes and angles at all buses. If fullJac = 0 or not given, the Jacobian as used for the power flow calculation, i.e., Jacobian ignoring reactive power equations and voltage magntidues at PV buses, real, reactive power equations, voltage magnitudes and angles at swing buses.
Shri -----Original Message----- From: Hiranya Seneviratne <hiranya.seneviratn...@gmail.com> Reply-To: MATPOWER discussion forum <matpowe...@list.cornell.edu> Date: Tuesday, June 2, 2015 at 10:44 AM To: MATPOWER discussion forum <matpowe...@list.cornell.edu> Subject: Re: Jacobian matrix values >Thank you. >However what is fulljac? As I am unable to find the value for that. >Thank you > >Sent from my iPhone > >> On 2 Jun 2015, at 16:29, "Abhyankar, Shrirang G." <abhy...@anl.gov> >>wrote: >> >> http://www.pserc.cornell.edu//matpower/docs/ref/matpower5.1/makeJac.html >> >> >> -----Original Message----- >> From: Hiranya Seneviratne <hiranya.seneviratn...@gmail.com> >> Reply-To: MATPOWER discussion forum <matpowe...@list.cornell.edu> >> Date: Tuesday, June 2, 2015 at 4:04 AM >> To: MATPOWER discussion forum <matpowe...@list.cornell.edu> >> Subject: Jacobian matrix values >> >>> Dear Ray, >>> Is it possible to find out the values of the jacobian matrix once the >>> power flow is calculated in Matpower? >>> Thank you >>> Hiranya >>> >>> Sent from my iPhone >> >> >> >
