Yes I m using balanced three phase but how can I do it with matpower. I changed the bus data and gen.data matrices but I couldn't get the power flows. On May 5, 2016 2:24 PM, "Jovan Ilic" <[email protected]> wrote:
> > You could use Matpower to simulate distribution systems if you are only > interested in balanced 3 phase without mutual line coupling systems. > > Jovan > > > On Thu, May 5, 2016 at 3:41 AM, Ji Chen <[email protected]> wrote: > >> Hi Shri, >> I am interested in power flows for distribution networks recently. Do >> you mean that Matpower is not a good chioce for distribution networks >> simulation or it just can not do distribution networks simulation? >> >> Thanks, >> Ji >> >> >> >> At 2016-05-04 23:02:50, "Abhyankar, Shrirang G." <[email protected]> wrote: >> >> http://ewh.ieee.org/soc/pes/dsacom/testfeeders/index.html >> >> However, as Jovan mentioned, MATPOWER is for solving balanced three-phase >> transmission systems. If you are interested in solving unbalanced >> three-phase power flows for distribution networks then refer to either >> OpenDSS or GridLAB-D. >> >> Shri >> >> From: Fiaz Ahmad <[email protected]> >> Reply-To: MATPOWER discussion forum <[email protected]> >> Date: Wednesday, May 4, 2016 at 8:49 AM >> To: MATPOWER discussion forum <[email protected]>, " >> [email protected]" <[email protected]> >> Subject: Re: modification on Matpower case.m file for power flow of >> distribution system >> >> Thanks Jovan, >> >> In Matpower there are no test cases for distribution systems... Where can >> i find IEEE distribution system test cases? >> >> Regards >> >> >> Have a nice day >> >> Regards, >> FIAZ AHMAD >> PhD Student, >> FENS Sabanci University, >> Istanbul Turkey >> >> >> >> On Wed, May 4, 2016 at 4:46 PM, Jovan Ilic <[email protected]> wrote: >> >>> >>> Fiaz, >>> >>> You are missing lots of data here. I suggest looking at IEEE >>> distribution system >>> test cases to see what is involved. Matpower is used for transmission >>> systems >>> not distribution systems. >>> >>> Jovan >>> >>> On Wed, May 4, 2016 at 3:45 AM, Fiaz Ahmad <[email protected]> >>> wrote: >>> >>>> Hi. i have the following data files for ieee 33 bus radial distribution >>>> system. i want to modify the case33.m file in matpower to carry out the >>>> power flow of the above distribution system. Please guide me how can i >>>> achieve that. >>>> >>>> linedata33 >>>> % Bus fbus tbus R X >>>> 1 1 2 0.0922 0.0470 >>>> 2 2 3 0.4930 0.2511 >>>> 3 3 4 0.3660 0.1864 >>>> 4 4 5 0.3811 0.1941 >>>> 4 5 6 0.8190 0.7070 >>>> 6 6 7 0.1872 0.6188 >>>> 7 7 8 0.7114 0.2351 >>>> 8 8 9 1.0300 0.7400 >>>> 9 9 10 1.0440 0.7400 >>>> 10 10 11 0.1966 0.0650 >>>> 11 11 12 0.3744 0.1238 >>>> 12 12 13 1.4680 1.1550 >>>> 13 13 14 0.5416 0.7129 >>>> 14 14 15 0.5910 0.5260 >>>> 15 15 16 0.7463 0.5450 >>>> 16 16 17 1.2890 1.7210 >>>> 17 17 18 0.7320 0.5740 >>>> 18 2 19 0.1640 0.1565 >>>> 19 19 20 1.5042 1.3554 >>>> 20 20 21 0.4095 0.4784 >>>> 21 21 22 0.7089 0.9373 >>>> 22 3 23 0.4512 0.3083 >>>> 23 23 24 0.8980 0.7091 >>>> 24 24 25 0.8960 0.7011 >>>> 25 6 26 0.2030 0.1034 >>>> 26 26 27 0.2842 0.1447 >>>> 27 27 28 1.0590 0.9337 >>>> 28 28 29 0.8042 0.7006 >>>> 29 29 30 0.5075 0.2585 >>>> 30 30 31 0.9744 0.9630 >>>> 31 31 32 0.3105 0.3619 >>>> 32 32 33 0.3410 0.5302 >>>> >>>> loaddata33 >>>> %Bus P Q >>>> 1 0 0 0 >>>> 2 100 60 0 >>>> 3 90 40 0 >>>> 4 120 80 0 >>>> 5 60 30 0 >>>> 6 60 20 0 >>>> 7 200 100 0 >>>> 8 200 100 0 >>>> 9 60 20 0 >>>> 10 60 20 0 >>>> 11 45 30 0 >>>> 12 60 35 0 >>>> 13 60 35 0 >>>> 14 120 80 0 >>>> 15 60 10 0 >>>> 16 60 20 0 >>>> 17 60 20 0 >>>> 18 90 40 0 >>>> 19 90 40 0 >>>> 20 90 40 0 >>>> 21 90 40 0 >>>> 22 90 40 0 >>>> 23 90 50 0 >>>> 24 420 200 0 >>>> 25 420 200 0 >>>> 26 60 25 0 >>>> 27 60 25 0 >>>> 28 60 20 0 >>>> 29 120 70 0 >>>> 30 200 600 0 >>>> 31 150 70 0 >>>> 32 210 100 0 >>>> 33 60 40 0 >>>> >>>> Please help and guide.... Thanks >>>> >>>> >>>> >>>> >>>> >>> >> >> >> >> > >
