See FAQ #5 <http://www.pserc.cornell.edu/matpower/#pfconvergence>.

   Ray


> On Jun 24, 2016, at 3:42 AM, anshu dahiya <[email protected]> wrote:
> 
> my 84 bus system is not converging into 10 iteration. what should i take 
> steps to make it converge.
> 
> On Thu, Jun 23, 2016 at 8:43 PM, Ray Zimmerman <[email protected] 
> <mailto:[email protected]>> wrote:
> Whenever you have a problem with a case file, the first thing to do is always 
> run case_info() 
> <http://www.pserc.cornell.edu/matpower/docs/ref/matpower6.0b1/case_info.html> 
> to check for errors in the connectivity information …
> 
> >> case_info('casem84')
> Bad bus numbers:              1
>            bus(1, BUS_I) = 0
> 
> Turns out that bus numbers must be positive integers, as stated in caseformat 
> <http://www.pserc.cornell.edu/matpower/docs/ref/matpower6.0b1/caseformat.html>.
> 
>     Ray
> 
> 
> 
>> On Jun 23, 2016, at 1:59 AM, anshu dahiya <[email protected] 
>> <mailto:[email protected]>> wrote:
>> 
>> sir how to solve the following error in matpower which comes in the case84 
>> which i have attached
>> Error using sparse
>> Index into matrix must be positive.
>> 
>> Error in ext2int (line 141)
>>             n2i = sparse(mpc.bus(:, BUS_I), ones(nb, 1), 1:nb, 
>> max(mpc.bus(:, BUS_I)), 1);
>> 
>> Error in runpf (line 111)
>> mpc = ext2int(mpc);
>> 
>> On Wed, Jun 22, 2016 at 6:59 PM, Ray Zimmerman <[email protected] 
>> <mailto:[email protected]>> wrote:
>> Assuming this is for a power flow problem, you still have to decide whether 
>> the bus is voltage controlled or not. If so, make it a PV bus. If not, and 
>> the DG simply injects a fixed amount of power without controlling voltage, 
>> then make it a PQ bus.
>> 
>>    Ray
>> 
>> 
>> 
>> > On Jun 22, 2016, at 1:27 AM, anshu dahiya <[email protected] 
>> > <mailto:[email protected]>> wrote:
>> >
>> > how to nominate DG bus which has load as well as generation
>> > the nomenclature in the matpower as below
>> > 1= PQ bus
>> > 2= PV bus
>> > 3= reference bus
>> > 4= isolated bus
>> > i have attached my file plz take a look of it. suggest me solution.
>> > <casem84.m>
>> 
>> 
>> 
>> 
>> <casem84.m>
> 
> 

Reply via email to