Yes, you are right, this is the version.
The whole message is:
Error using +
Matrix dimensions must agree.
Error in opf_setup (line 212)
cpg(ip1) = cpg(ip1) + pcost(ip1, COST) * baseMVA;
Error in opf (line 225)
om = opf_setup(mpc, mpopt);
Error in runopf (line 75)
[r, success] = opf(casedata, mpopt);
Error in Solve_run_uopf_opf (line 38)
ropf = runopf(mpc, mpopt)
I think the problem is that only one generator is active.
Thanks for your respond.
Amalia Mavrogianni.
Στις Πέμ, 17 Ιαν 2019, 22:26 ο χρήστης Ray Zimmerman <[email protected]>
έγραψε:
> MATPOWER 7.1 does not exist. I assume you mean 7.0b1, right?
>
> Btw, I think you included the details of *where* the error occurs, but not
> *what* the error message is. It might give us a clue.
>
> Ray
>
>
> On Jan 17, 2019, at 2:10 PM, Αμαλία Μαυρογιάννη <[email protected]>
> wrote:
>
> Thanks for your respond,
>
> I use Matpower 7.1.
>
> Many regards.
> Amalia Mavrogianni
>
> Στις Πέμ, 17 Ιαν 2019, 22:04 ο χρήστης Ray Zimmerman <[email protected]>
> έγραψε:
>
>> I am not able to reproduce the error below. What version of MATPOWER are
>> you using? (type mpver to find out)
>>
>> Ray
>>
>>
>> On Jan 13, 2019, at 5:33 AM, Αμαλία Μαυρογιάννη <[email protected]>
>> wrote:
>>
>> Hello all,
>> I have problem in my case with cost it says:
>> Error in opf_setup (line 212)
>> cpg(ip1) = cpg(ip1) + pcost(ip1, COST) * baseMVA;
>>
>> Error in opf (line 225)
>> om = opf_setup(mpc, mpopt);
>>
>> Error in runopf (line 75)
>> [r, success] = opf(casedata, mpopt);
>>
>> Error in Solve_run_uopf_opf (line 37)
>> ropf = runopf(mpc, mpopt)
>>
>> If you run my M-file Solve_run_uopf_opf.m you will see the exact
>> problem. Please help.
>>
>> Many regards.
>> Amalia Mavrogianni
>> <my_case.m><Solve_run_uopf_opf.m>
>>
>>
>>
>
