1) Assuming you want to run a power flow, you simply set the PG column in the
gen matrix to the output of the wind generator at the moment you are
simulating. If you want to solve for different wind conditions and output
levels, each will be a separate power flow run with a different value of PG in
the gen matrix..
2) Yes. But the “how" depends on the system and range of operating conditions,
etc.
Ray
> On Nov 12, 2019, at 1:39 AM, zafar ayub <ayubdawar...@gmail.com> wrote:
>
> Hi ,
> Fist i would like to thank you for ur time guiding. May question is that
> 1) how can we define the generator used in wind farm are constant or variable
> speed generator.
> 2) the location of wind integratio effets the voltages stability and how???
>
> zafar Ayb
>
> On Tue, Nov 12, 2019, 2:31 AM Ray Zimmerman <r...@cornell.edu
> <mailto:r...@cornell.edu>> wrote:
> MATPOWER does not have any implementation of L-index functionality. And your
> other question about modeling wind generation is addressed in my previous
> response below. Feel free to get more specific with your question if there is
> a specific part you don’t understand.
>
> Ray
>
>
>> On Nov 10, 2019, at 12:35 AM, zafar ayub <ayubdawar...@gmail.com
>> <mailto:ayubdawar...@gmail.com>> wrote:
>>
>> Hi Ray, Hope this mail will find you well. Can we model L-index in Matpower
>> , if yes then plz share the information
>> Thank you
>> Ayub
>>
>> On Tue, Oct 29, 2019, 8:41 PM Ray Zimmerman <r...@cornell.edu
>> <mailto:r...@cornell.edu>> wrote:
>> For a simple power flow or OPF, you can model a wind generator as any other
>> generator (specify the output power) or as a negative load. For the OPF, you
>> might consider setting the cost to a level below which the wind generation
>> would be curtailed.
>>
>> Ray
>>
>>
>> > On Oct 28, 2019, at 2:01 AM, zafar ayub <ayubdawar...@gmail.com
>> > <mailto:ayubdawar...@gmail.com>> wrote:
>> >
>> > Hi Matpower,
>> > hope u all will be ok and good.
>> > i want to know, how can i integrate wind power to the existing power
>> > system IEEE any standard bus system in matpower.
>> > thank you
>> > very much'
>> > Zafar Ayub
>>
>>
>>
>
