Hello Tilo,
below the backint-output-part. It seems the output is empty. I can
send you the complete file.
best Regards
Frank
Copying output of Backint for MaxDB to this file.
---------- Begin of output of Backint for MaxDB
(/sapdb/ALI/sapbackup/backint/backint.out)----------
********************************************************************************
Program: /sapmnt/AAI/exe/backint 4.5FP_3GA
Input File: /sapdb/ALI/sapbackup/backint/backint.inp
Profile: /sapdb/ALI/sapbackup/backint/initALI.utl
Function: BACKUP
Backup Type: BACKUP_FILE
********************************************************************************
********************************************************************************
---------- End of output of Backint for MaxDB
(/sapdb/ALI/sapbackup/backint/backint.out)----------
Removed Backint for MaxDB's temporary output file
'/sapdb/ALI/sapbackup/backint/backint.out'.
Copying error output of Backint for MaxDB to this file.
---------- Begin of error output of Backint for MaxDB
(/sapdb/ALI/sapbackup/backint/backint.err)----------
---------- End of error output of Backint for MaxDB
(/sapdb/ALI/sapbackup/backint/backint.err)----------
Removed Backint for MaxDB's temporary error output file
'/sapdb/ALI/sapbackup/backint/backint.err'.
Removed the Backint for MaxDB input file
'/sapdb/ALI/sapbackup/backint/backint.inp'.
Copying pipe2file output to this file.
---------- Begin of pipe2file output
(/tmp/temp1187627401-0)----------
---------- End of pipe2file output
(/tmp/temp1187627401-0)----------
Removed pipe2file output '/tmp/temp1187627401-0'.
Copying pipe2file error output to this file.
---------- Begin of pipe2file error output
(/tmp/temp1187627401-1)----------
---------- End of pipe2file error output
(/tmp/temp1187627401-1)----------
Removed pipe2file error output '/tmp/temp1187627401-1'.
Have finished clean up successfully.
The backup of stage file '/sapdb/ALI/saparch/LCLOG.719' was
unsuccessful.
2007-08-20 18:31:03
Cleaning up.
On Mon, 20 Aug 2007 19:15:42 +0200, [EMAIL PROTECTED] ("Heinrich,
Tilo") wrote:
>Hello Frank,
>
>So pipe2file gets killed, because "sapmnt/AAI/exe/backint" finished with an
>error. Somewhere below in dbm.ebl you should find the output of backint. Maybe
>that gives us a hint, why the backups fail.
>
>Best regards,
>Tilo Heinrich
>Senior Developer
>MaxDB&liveCache
>SAP AG
>http://www.sap.com
>
>Sitz der Gesellschaft/Registered Office: Walldorf, Germany
>Vorstand/SAP Executive Board: Henning Kagermann (Sprecher/CEO), Shai Agassi,
>Léo Apotheker, Werner Brandt, Claus Heinrich, Gerhard Oswald, Peter Zencke
>Vorsitzender des Aufsichtsrats/Chairperson of the SAP Supervisory Board: Hasso
>Plattner
>Registergericht/Commercial Register Mannheim No HRB 350269
>
>Diese E-Mail kann Betriebs- oder Geschäftsgeheimnisse oder sonstige
>vertrauliche Informationen enthalten. Sollten Sie diese E-Mail irrtümlich
>erhalten haben, ist Ihnen eine Kenntnisnahme des Inhalts, eine
>Vervielfältigung oder Weitergabe der E-Mail ausdrücklich untersagt. Bitte
>benachrichtigen Sie uns und vernichten Sie die empfangene E-Mail. Vielen Dank.
>
>This e-mail may contain trade secrets or privileged, undisclosed, or otherwise
>confidential information. If you have received this e-mail in error, you are
>hereby notified that any review, copying, or distribution of it is strictly
>prohibited. Please inform us immediately and destroy the original transmittal.
>Thank you for your cooperation.
>
>
>-----Original Message-----
>From: Frank
>Sent: Montag, 20. August 2007 18:49
>To: [email protected]
>Subject: Re: using archive_stage und archive_stage_repeat in scripts
>
>Hello Tilo,
>
>below a part of dbm.ebl
>The period from start Pipe2file till kill pipe2file seems always about
>60 sec.
>
>best Regards
>
>Frank
>
>
>---------------------------------------------------------------------------------------------------
> Constructed pipe2file call 'pipe2file -d file2pipe -f
>/sapdb/ALI/saparch/LCLOG.719 -p /sapdb/ALI/saparch/BACKINT_LOG_PIPE
>-nowait'.
>
> Starting pipe2file for stage file '/sapdb/ALI/saparch/LCLOG.719'.
> Starting pipe2file process 'pipe2file -d file2pipe -f
>/sapdb/ALI/saparch/LCLOG.719 -p /sapdb/ALI/saparch/BACKINT_LOG_PIPE
>-nowait >>/tmp/temp1187627401-0 2>>/tmp/temp1187627401-1'.
> Process was started successfully.
> Pipe2file has been started successfully.
>
> Starting Backint for MaxDB.
> Starting Backint for MaxDB process '/sapmnt/AAI/exe/backint -u
>ALI -f backup -t file -p /sapdb/ALI/sapbackup/backint/initALI.utl -i
>/sapdb/ALI/sapbackup/backint/backint.inp -c
>>>/sapdb/ALI/sapbackup/backint/backint.out
>2>>/sapdb/ALI/sapbackup/backint/backint.err'.
> Process was started successfully.
> Backint for MaxDB has been started successfully.
>
> Waiting for end of the backup operation.
> 2007-08-20 18:30:01 The backup tool is running.
> 2007-08-20 18:30:01 Pipe2file is running.
>
> 2007-08-20 18:30:02 The backup tool process has finished work
>with return code 2.
>
> 2007-08-20 18:30:06 Pipe2file is running.
>
> 2007-08-20 18:30:16 Pipe2file is running.
>
> 2007-08-20 18:30:31 Pipe2file is running.
>
> 2007-08-20 18:30:51 Pipe2file is running.
>
> Killing not reacting pipe2file process.
> Pipe2file killed successfully.
>
> 2007-08-20 18:31:03 The pipe2file process has finished work
>with return code -1.
> The backup operation has ended.
>------------------------------------------------------------------------------------------------------
>
>
>On Mon, 20 Aug 2007 17:13:54 +0200, [EMAIL PROTECTED] ("Heinrich,
>Tilo") wrote:
>
>>Hello Frank,
>>
>>I do not remember pipe2file having any timeout. What do you see exactly in
>>dbm.ebl?
>>
>>Best regards,
>>Tilo
>>
>>Tilo Heinrich
>>Senior Developer
>>MaxDB&liveCache
>>SAP AG
>>http://www.sap.com
>>
>>Sitz der Gesellschaft/Registered Office: Walldorf, Germany
>>Vorstand/SAP Executive Board: Henning Kagermann (Sprecher/CEO), Shai Agassi,
>>Léo Apotheker, Werner Brandt, Claus Heinrich, Gerhard Oswald, Peter Zencke
>>Vorsitzender des Aufsichtsrats/Chairperson of the SAP Supervisory Board:
>>Hasso Plattner
>>Registergericht/Commercial Register Mannheim No HRB 350269
>>
>>Diese E-Mail kann Betriebs- oder Geschäftsgeheimnisse oder sonstige
>>vertrauliche Informationen enthalten. Sollten Sie diese E-Mail irrtümlich
>>erhalten haben, ist Ihnen eine Kenntnisnahme des Inhalts, eine
>>Vervielfältigung oder Weitergabe der E-Mail ausdrücklich untersagt. Bitte
>>benachrichtigen Sie uns und vernichten Sie die empfangene E-Mail. Vielen Dank.
>>
>>This e-mail may contain trade secrets or privileged, undisclosed, or
>>otherwise confidential information. If you have received this e-mail in
>>error, you are hereby notified that any review, copying, or distribution of
>>it is strictly prohibited. Please inform us immediately and destroy the
>>original transmittal. Thank you for your cooperation.
>>
>>
>>-----Original Message-----
>>From: Frank
>>Sent: Freitag, 17. August 2007 18:18
>>To: [email protected]
>>Subject: Re: using archive_stage und archive_stage_repeat in scripts
>>
>>Hello Tilo,
>>
>>As I see in dbm.ebl or *.ssa it seems that the pipe2file-cmd timed
>>out. This happens only one or two times a day likely because highload
>>of the backup-Server.
>>
>>Is there any way to avoid this situation or change the timeout-value
>>for the pipe2file-cmd
>>
>>Best Regards Uwe
>>
>>
>>On Fri, 27 Jul 2007 18:00:31 +0200, [EMAIL PROTECTED] ("Heinrich,
>>Tilo") wrote:
>>
>>>Hello Frank,
>>>
>>>One option would be to put the archive_stage* commands into an additional
>>>file and use the '-i <input_file>' option of dbmcli. In this case dbmcli
>>>would not execute the archive_stage_repeat, if the archive_stage had already
>>>failed (at least, this is stated by
>>>http://maxdb.sap.com/currentdoc/84/5b0282467f11d4aa1100a0c9430730/frameset.htm
>>>
>>><http://maxdb.sap.com/currentdoc/84/5b0282467f11d4aa1100a0c9430730/frameset.htm>
>>> ).
>>>
>>>Best regards,
>>>Tilo
>>>
>>>Tilo Heinrich
>>>Senior Developer
>>>MaxDB&liveCache
>>>SAP AG
>>>http://www.sap.com <http://www.sap.com/>
>>>
>>>Sitz der Gesellschaft/Registered Office: Walldorf, Germany
>>>Vorstand/SAP Executive Board: Henning Kagermann (Sprecher/CEO), Léo
>>>Apotheker (stellvertretender Sprecher/Deputy CEO), Werner Brandt, Claus
>>>Heinrich, Gerhard Oswald, Peter Zencke
>>>Vorsitzender des Aufsichtsrats/Chairperson of the SAP Supervisory Board:
>>>Hasso Plattner
>>>Registergericht/Commercial Register Mannheim No HRB 350269
>>>
>>>Diese E-Mail kann Betriebs- oder Geschäftsgeheimnisse oder sonstige
>>>vertrauliche Informationen enthalten. Sollten Sie diese E-Mail irrtümlich
>>>erhalten haben, ist Ihnen eine Kenntnisnahme des Inhalts, eine
>>>Vervielfältigung oder Weitergabe der E-Mail ausdrücklich untersagt. Bitte
>>>benachrichtigen Sie uns und vernichten Sie die empfangene E-Mail. Vielen
>>>Dank.
>>>
>>>This e-mail may contain trade secrets or privileged, undisclosed, or
>>>otherwise confidential information. If you have received this e-mail in
>>>error, you are hereby notified that any review, copying, or distribution of
>>>it is strictly prohibited. Please inform us immediately and destroy the
>>>original transmittal. Thank you for your cooperation.
>>>
>>>-----Original Message-----
>>>From: Frank
>>>Sent: Freitag, 27. Juli 2007 14:12
>>>To: [email protected]
>>>Subject: Re: using archive_stage und archive_stage_repeat in scripts
>>>
>>>Helle Tilo,
>>>
>>>sorry that I didn't explain the error-situation.
>>>
>>>if the backup-infrastructure (tape_changer,robots, Mediaserver etc)
>>>has to work on a high load the responsetime of the external backup
>>>program is higher then the TIMEOUT...-Parameter in bsi.env
>>>So the first archive_step fails
>>>Now the second archive_step can run ok and we have only 1 copy of the
>>>logfile.
>>>
>>>I increased the TIMEOUT...-Parameter in bsi.env to 300 sec. Now we
>>>have nearly no errors.
>>>
>>>The last error seems not covered from the timeout-Parameter because
>>>" The pipe2file process has finished work with return
>>>code -1." after 1 min 03 sec
>>>
>>>I will send you the dbm.ebl.
>>>
>>>Best Regards
>>>Frank
>>>
>>>
>>>
>>>On Wed, 25 Jul 2007 14:51:08 +0200, [EMAIL PROTECTED] ("Heinrich,
>>>Tilo") wrote:
>>>
>>>>Hello Frank,
>>>>
>>>>Does log file dbm.ebl contain any information about such an error
>>>>situation, if so can you please send the log file dbm.ebl to the mailing
>>>>list or to me?
>>>>
>>>>Best regards,
>>>>Tilo
>>>>
>>>>Tilo Heinrich
>>>>Senior Developer
>>>>MaxDB&liveCache
>>>>SAP AG
>>>>http://www.sap.com <http://www.sap.com> <http://www.sap.com/
>>>><http://www.sap.com/> >
>>>>
>>>>Sitz der Gesellschaft/Registered Office: Walldorf, Germany
>>>>Vorstand/SAP Executive Board: Henning Kagermann (Sprecher/CEO), Shai
>>>>Agassi, Léo Apotheker, Werner Brandt, Claus Heinrich, Gerhard Oswald, Peter
>>>>Zencke
>>>>Vorsitzender des Aufsichtsrats/Chairperson of the SAP Supervisory Board:
>>>>Hasso Plattner
>>>>Registergericht/Commercial Register Mannheim No HRB 350269
>>>>
>>>>Diese E-Mail kann Betriebs- oder Geschäftsgeheimnisse oder sonstige
>>>>vertrauliche Informationen enthalten. Sollten Sie diese E-Mail irrtümlich
>>>>erhalten haben, ist Ihnen eine Kenntnisnahme des Inhalts, eine
>>>>Vervielfältigung oder Weitergabe der E-Mail ausdrücklich untersagt. Bitte
>>>>benachrichtigen Sie uns und vernichten Sie die empfangene E-Mail. Vielen
>>>>Dank.
>>>>
>>>>This e-mail may contain trade secrets or privileged, undisclosed, or
>>>>otherwise confidential information. If you have received this e-mail in
>>>>error, you are hereby notified that any review, copying, or distribution of
>>>>it is strictly prohibited. Please inform us immediately and destroy the
>>>>original transmittal. Thank you for your cooperation.
>>>>
>>>>-----Original Message-----
>>>>From: Frank
>>>>Sent: Dienstag, 24. Juli 2007 19:17
>>>>To: [email protected]
>>>>Subject: Re: using archive_stage und archive_stage_repeat in scripts
>>>>
>>>>Hello Tilo,
>>>>
>>>>I use the following skript for archiving (thanks for your support)
>>>>
>>>>dbmcli -u control,control -d $SID -uUTL -c <<EOF
>>>>(step-1) archive_stage $ARCHIVE_MEDIUM $LOG_MEDIUM NOVERIFY KEEP
>>>>(step-2) archive_stage_repeat $ARCHIVE_MEDIUM2 $LOG_MEDIUM VERIFY
>>>>EOF
>>>>
>>>>If step_1 fails and step_2 succeed I get only 1 backup and afterwards
>>>>the log wil be deleted.
>>>>
>>>>Is there any possibility to avoid this situation?
>>>>
>>>>best regards Frank
>>>
>>>
>>>
--
MaxDB Discussion Mailing List
For list archives: http://lists.mysql.com/maxdb
To unsubscribe: http://lists.mysql.com/[EMAIL PROTECTED]
