Hallo,

MDaemon 9.5.1 release kemarin
Akan tetapi saya menyarankan Anda utk tdk download/install dulu, 
karena beberapa user mengalami problem local/remote queue stuck.
Lebih baik tunggu MDaemon 9.5.2 dan Security Plus (aka MDAV) 3.0.2 
yg rencananya akan release pada tanggal 31 Oktober 2006 (1 November 
2006 Waktu Indonesia).

Akan tetapi kalau Anda ingin coba, silakan download dari link 
berikut ini (kami sendiri tdk mengalami problem lock up ini)

ftp://ftp.dutaint.com/altn-mdaemon/md951_en.exe
http://ftp.dutaint.com/altn-mdaemon/md951_en.exe

-------------------------------
MDaemon 9.51 - October 25, 2006
-------------------------------

  o [5266] fix to ComAgent crash when attempting to open IM dialog
  o [5262] fix to local queue being locked after processing message 
to a user with a long list of forwarding addresses
  o [5260] fix to updating a task in WorldClient breaks the task in 
Outlook
  o [5263] fix to manually editing the forwarding database may cause 
a mail loop
  o [5265] fix to Firefox 2.0 not dragging & dropping or resizing 
notes correctly
  o [5259] fix to AntiVirus rather than SecurityPlus on Register 
dialog tab
  o [5267] fix to Queues dialog "local mail" radio button not 
working or disappearing

-------------------------------
MDaemon 9.50 - October 24, 2006
-------------------------------

----------------------
SPECIAL CONSIDERATIONS
----------------------

  o [5168] The installer will warn about DEP if the Windows OS 
version > 5.1and DEP is configured to use "OptOut" or "AlwaysOn".

  o The following applies only if you are a licensed user of MDaemon 
Antivirus (MDAV) or SecurityPlus for MDaemon:
  
    These products now require registration key activation.  The 
goal of the activation system is to combat piracy and protect the 
interests of legitimate customers.
        
    An activation wizard is available which will walk you through 
the simple process of activating your registration key.  You can 
activate in a fully automated fashion or manually if you prefer.  
The process takes only a few seconds.  
    
    Activation verifies that the key you are using is legitimate.  
It also ties your registration information to your computer using 
the MAC address of your Network Interface Card making it difficult 
for others to illegally use your registration key.  No personal 
information about you is required or transmitted.  Reactivation is 
required only if you change out your Network card.  
    The 'Help | Activate your Alt-N software' menu selection leads 
to the Activation Wizard should you need to do this in the future.  
    
    Multiple activations are allowed however this is for customer 
convenience only and should not be considered license to violate 
the EULA.  Registered users have 30 days in which to activate.  
Activation is required in order for Alt-N products to function.

    For a more detailed description of activation see:
    http://www.altn.com/Activation/faq.asp

  o MDaemon no longer supports AntiVirus products from 
Deerfield.com.

  o If you were using the "Bounce spam back to sender" option in the 
Spam Filter your configuration has been changed to "Flag spam but 
accept it" due to a design change to the Bounce option (see item 
[5018] below)

  o [5025] When gateways are configured to forward mail and the 
option to "keep a local copy" is enabled there is the potential to 
redeliver all the same mail if someone checks the "Deliver messages 
at each scheduled remote mail interval" option.

    To address this, the following changes were made:

    1) The "Keep a local copy" of forwarded mail option was changed 
to be disabled by default.  You should check all your gateways to 
make sure that this setting is as you desire.

    2) Added a warning box when enabling "Deliver messages at each 
scheduled remote mail interval" to warn of the possibility of this 
occurrence.

  o The "Send mail at this interval" slider value has been reset to 
a default value of five minutes.  You may need to change this to 
your preference (see item [63] below).

  o [4980] Added SMTP parameter RFC compliance checking.  The SMTP 
server will now reject parameters which contain control or 8-bit 
characters.  This check has been combined with the existing basic 
body compliance check and can be toggled on/off via a switch in 
Misc. Options|Servers which was relabeled to reflect this new 
functionality.  Compliance checks on SMTP parms and body
content are now ENABLED by default which is a departure from older 
versions. Disable if you must receive mail from non-compliant 
sources.

  o Check the PTR options on the Reverse Lookup UI.  These settings 
have been returned to defaults due to required internal changes.

  o [4811] For the Japanese version of MDaemon, the installer will 
correct bad folder names used by older versions of MDaemon and 
Outlook Connector.
Please make a backup before installing 9.50.  If you're using OC, 
update to version 2.1.2 or newer on the server and all client 
machines.

------------------
MAJOR NEW FEATURES
------------------

  * [63] CUSTOM SCHEDULING AND MAIL QUEUEING (MDaemon PRO only) *
   
    It is now possible to create any number of schedules you wish.  
You can name each schedule and attach a schedule to a custom mail 
queue.  You can also create as many custom mail queues as you want.  
Use the CF to move messages into your custom queues based on any 
criteria you wish.  For example, you can create a schedule called 
"Big Mail", create a queue to store that mail, and then create a 
Content Filter rule using the new "MOVE message to custom QUEUE" 
action to move messages over a certain size into that queue.  If 
you'd like mailing list messages delivered at certain times  then 
create a schedule called (for example) "List Mail", create a queue, 
and  then use a Content Filter rule to move messages with an 
X-MDMailing-List  header into the new queue.

    Some important points:

    1)  The schedule manager now runs in it's own thread and signals 
events  rather than performing them itself.
    2)  DomainPOP and MultiPOP mail continue to be collected 
according to the  Default schedule only (see the scheduler UI).
    3)  Only queues created to handle remote mail (not local mail) 
are eligible for use with a schedule.  Local mail is always 
delivered immediately.
    4)  Any schedule not bound to a custom queue will be bound to 
the default remote queue.
    5)  The Schedule Editor and Queue Editor UIs have been changed.
    6)  The "Send mail at this interval" slider value has been reset 
to a  default value of five minutes.  You may need to change this 
to your  preference.
    7)  The RAS option entitled "maximize use of this connection 
profile" has been deprecated and removed.  It is incompatible with 
the new schedule/queue changes.  
    8)  The concept of "temporary" queues has been deprecated and 
removed.  This concept is incompatible with the new schedule/queue 
changes. 
    9)  "Freezing" remote mail queue processing stops ALL remote 
custom queues.
    10) Removing a queue will remove all schedules tied to the queue 
and disable any content filter rules associated with moving 
messages into the queue.
    11) You can expand the root node for the Local, Remote, and RAW 
queue within MDaemon's UI.  Doing so will show the path and message 
count for each queue.  However, these counts can slow the UI so 
close the node when you don't need to know the counts.  Double left 
click any node to load its  contents into the UI.
    12) When using the "Random" minute option with AV scheduling, 
accessing the schedule editor UI will re-seed all the time values.
    13) The LAN queue which stores mail for remote domains which do 
not need RAS in order to reach will be processed according to the 
Default mail processing schedule rather than at local mail 
processing intervals.  This change saved loads of CPU cycles. 
    14) [4823] Added "MOVE message to custom QUEUE" content filter 
action

  * [4601] SPAM TRAPS (MDaemon PRO only) *

    The Security menu has a new option called "Spam Traps".  Spam 
traps are local email addresses purposely designed to collect spam.  
These email addresses should never be assigned to actual users.  
Once your spam traps are setup, expose them publicly by using them 
in a post to a news group or public mailing list.  If all goes 
right, they will be harvested and will soon begin receiving spam.  
        
    A single RCPT to a spam trap address is all it takes to trip the 
spam trap system causing the message to be delivered to the 
Bayesian spam folder and, optionally, banning future connections 
from the sending IP address.  Some security features are bypassed 
in order to allow this to happen.

    Messages sent to a spam trap are routed only to the Bayesian 
spam folder. 
    They are not delivered to actual users even when other RCPT 
commands are provided in the SMTP session.

  * "NOTES" SUPPORT FOR WORLDCLIENT & OUTLOOK CONNECTOR USERS & 
SYNCML *
  
    WorldClient now supports a new folder type "Notes".  Notes 
folders are sharable with other users and will synchronize with 
Outlook Connector.  
    MDaemon's SyncML supports the synchronization of notes folders.  
Outlook Connector and SyncML require MDaemon PRO.

  * IMPROVED SYNCML SERVER NOW SUPPORTS SYNC4J CLIENTS (MDaemon PRO 
only) *
  
    MDaemon's SyncML server now supports the open source Sync4j 
SyncML clients. The Sync4j SyncML clients may be downloaded from 
http://www.funambol.com/opensource/downloads.html. 
Our testing has revealed that the version 3.x     clients which are 
currently in beta are more robust and feature complete than the 
version 2.x clients.  The Sync4j encryption option is not supported
at this time.  

-----------------------------------
CHANGES AND ADDITIONAL NEW FEATURES
-----------------------------------

  o Simplified the so-called "Ghost" session:
    
    1) MDaemon no longer requires a separate "Ghost" program manager 
icon
    2) The Ghost term was dropped.  Configuration Sessions are now 
called Configuration Sessions.
    3) Launching MDaemon for the first time starts all the mail 
services while any subsequent launch either starts or brings to the 
fore the Configuration Session.

  o PocketPC theme fixes & changes:
    
    1) [4761] Changed navigation to be text links instead of images. 
This should improve load speeds and reduce bandwidth usage
    2) [4836] Changed .PocketPC login to not force the .PocketPC 
theme if the user doesn't pass "&Theme=.PocketPC" in the URL
    3) [4982] If a non-Pocket IE browser uses the .PocketPC theme 
they will be allowed to switch themes (this is useful for desktop 
browsers that accidentally get changed to .PocketPC theme)
    4) [4219] fixed the delete calendar events bug that prevented 
calendar events from being deleted.

  o [5106] Added MDSpamD "debug logging" (which is disabled by 
default):

    1) Added MDSpamD tab to the main MDaemon UI.
    2) Added switch to logging options to enable MDSpamD logging - a 
warning though, this is a performance drain.
    3) Added same switch to MDSpamD tab in Spam Filter UI.
    4) Added an MDSpamD log file which tracks all this logging - 
another warning, this file could get big fast.
        
    Known limitation:  When MDaemon runs as a service and user 
credentials are provided MDaemon will not be able to communciate 
with MDSpamD for logging purposes and no logging will take place.

  o [5119] Added "Show Window" option to MDSpamD properties in the 
Spam Filter.
    When this is enabled the output from MDSpamD is piped to its 
external process window rather than MDaemon's internal UI and 
logging system.  This will avoid the performance drain associated 
with piping MDSpamD output into MDaemon itself.  
    However, there will be no log file created.  This option can not 
be used in combination with the MDSpamD internal UI and logging 
option.

  o [4434] Moved the installer backup option from the "directory 
selection" page to the "start installation" page.  This is to solve 
a problem whereby many people were thinking the installation 
directory was actually the backup directory and so they were 
changing it.  The result was an installation that did not work 
properly.

  o [4554] Added option to reverse lookups to exempt authenticated 
sessions from PTR lookups on the connecting IP.  When this switch 
is enabled the PTR lookup on the connecting IP is deferred until 
after the MAIL command in order to determine whether the connection 
used authentication or not.

  o [4662] You can now enter ZERO into the retry queue configuration 
for the number of days to retry delivering mail.  After the first 
retry, the message will be bounced back.

  o [5067] The option to count sub-folders when applying quota 
restrictions has been disabled by default.  This setting is in 
Misc. Options|Misc if you want to check and make sure it is set to 
your expectation.

  o [5155] Reorganized the tab layout in the main GUI to group 
things together in a more organized way.  The security related 
items are now in a Security tab and the OC and WC items are in the 
Mail tab.

  o [5156] Added SyncML log tab to GUI.  This just mirrors the 
SyncML log file.

  o [5121] Changed work file copy method to prevent .cf files from 
going missing at times.

  o [5120] Added option to Misc Options|GUI to save the state of the 
stat window root node counters across reboots.

  o [5128] The DNS-BL engine was changed to skip the X _most recent_ 
Received headers rather than the X _oldest_ Received headers.  It 
doesn't seem to make much sense to skip the oldest Received 
headers.  The idea is you want to skip the newest 
    Received headers because those stamps would be from the hops 
closest to you which you might trust (especially your ISP in the 
case of DomainPOP/MultiPOP mail). Also, the default number of 
Received headers to skip for SMTP collected mail was changed 
to 0 rather than 1.  The DNS-BL GUI was updated.

  o [5139] Moved several CF and AV related .dat files out of 
MDaemon's resource file and into disk files that the installer will 
pick up and place in the APP folder.

  o [5068] Constantly hitting the disk to check user quotas has been 
identified as a significant performance drain.  So, the results of 
these quota checks are now cached in QUOTACOUNTS.DAT.  MDaemon will 
maintain and police this file.  If you want to clear the cached 
quota value for an account add that account's email address to a 
CLEARQUOTACOUNTS.SEM file and place it in the APP folder.

  o [5070] Added a "Statistics" tab to the main UI.  This contain 
the same summary report that is generated by other means (see 
elsewhere in this document).  This report is not updated in 
real-time but it should refresh with current content every minute 
or so.  It is possible to alter the text in this tab because I 
don't know how to prevent that however it could be useful I 
suppose.

    If you don't like the font I used you can customize it in 
MDaemon.ini:
        
    [ReportWindow]
    DefFontFace=Courier New
    DefFontHeigh=15
    DefFontWidth=7

  o The WebAdmin configuration dialog has lost the domain and 
language selection controls.  WebAdmin dymanically detects the 
language that the user needs so these controls were irrelevant.

  o [5071] Added quarantine queue to the queue list in stats window.

  o [5073] Added right-click option to session window to put IP of 
selected entries on the dynamic screen.  Nothing will be done if 
dynamic screening is disabled and this feature can not add trusted 
or local IPs.

  o [5069] Right-clicking on a root node in stats window gives a 
"reset root node counts" option which zeros all the root node 
counters (this is necessary because they all inter-relate for 
proper calculations).

  o [5075] Removed option to "authenticate list posts using FROM 
header" from Misc Options.  This will always take place.  MDaemon 
will also verify list posters using the SMTP envelope unless you 
set this switch in the MDaemon.ini file:
 
    [Special]
    EnvelopeListCheck=No (default Yes)

  o [5096] WorldClient's mail check has been optimized to defer 
loading new messages until a folder is actually opened.  
Previously, checking for mail would load all new messages in all 
folders.  This should reduce log in times.

  o [5125] Updated DKIM to version 0.5 of the specification.

  o [4969] Added DKIM signing option to include z= (copied headers) 
in signatures.

  o [4956] The DKIM verifier no longer queries for or honors DKIM 
SSP records  by default.  You can re-enable this via a new switch 
located on the DK/DKIM verification UI.  SSP is being disabled by 
default in preparation for SSP changes which are coming thanks to 
the work being done in the IETF right now.  When enabled, MDaemon's 
DKIM verifier processes SSP records according
    to http://tools.ietf.org/html/draft-allman-dkim-ssp-00.

  o [4918] WorldClient's contacts now support a name prefix and 
suffix.  These fields are synchronized with the Outlook Connector 
and SyncML.

  o The FORGED_MUA_OUTLOOK rule has been reenabled in 
80_MDaemon_scores.cf.

  o Added scroll-bar to folder selection in Account filter editor.

  o MDaemon will log an error code into the System log anytime a 
process fails to start or fails to start as a specified user.  This 
will allow us to try and discover why these failures happen for 
some sites.

  o The Content Filter "Administrators" tab has been renamed 
"Recipients" since this is just a list of email addresses that 
receive Content Filter notification messages.

  o Previously, messages over 50K were not put through the spam 
filter.  Now the  default is 200K.

  o Slightly changed text on Account Forwarding, Gateway Forwarding, 
and Setup| Primary Domain|Delivery UI to state how to specify host 
name values.

  o The installer will delete old 80_MDaemon_surbl.cf and 
90_MDaemon_surbl.cf  files.

  o Slight textual changes to Spam Filter Bayesian tab.

  o Made slight GUI change to mailing list notifications tab.

  o [4924] IP and Host screening will never block local or trusted 
IPs.

  o [4892] Several changes were made to the anti-relay logic and UI.  
The UI was changed to better reflect how the options actually work 
and interact.  For example, the options to verify whether local 
accounts exist when given in an SMTP MAIL or RCPT command now 
operate on their own - they no longer depend on what the anti-relay 
setting says.  Second, a new option is available which will allow 
you to control whether messages sent from trusted IPs or hosts 
should be relayed.  In previous versions this was always allowed 
but now it has to be specifically enabled.

  o [4928] Removed update checking code from MDaemon.exe and put it 
all into MDUpdater.exe (previously some of it was in one place and 
the rest in the other place).

  o [4926] Messages submitted to MDaemon from the same computer as 
MDaemon will no longer be spam filtered by default.  This mainly 
impacts WorldClient since mail submitted by WorldClient to MDaemon 
for delivery always takes place on the same computer.  You can 
disable this behavior by setting the following switch in the 
CFilter.ini file:

    [SpamFilter]
    SkipLocalLoopback=No (default Yes)

  o [2237] Added an option to the Content Filter which allows you to 
scan the content of zipped attachments looking for restricted 
files.  This option appears on a slightly redesigned "Attachments" 
tab within the Content Filter.  In addition, any rule which 
triggers based on a file name match will trigger if the file is 
found within a zipped attachment.

  o [4859] Added an option to Misc Options|Headers and Setup|Primary 
Domain to always use the FQDN value when creating Received header 
stamps.  By default, MDaemon uses the domain value associated with 
the connecting IP or recipient(s).

  o Added four INI values for that can be placed in WorldClient's 
Domains.ini 
    or User.ini files that will speed up the HTML compose 
component's load time by disabling specific plugins:

    DisableComposeCharacterMap=Yes
    DisableComposeListType=Yes
    DisableComposeStylist=Yes
    DisableComposeTableOperations=Yes
        
    These values default to 'No' so that the compose view will load 
as people are used to in the 9.0 series.

  o [4921] Added two User.ini values that will set a minimum width 
for the left pane in the WorldClient LookOut theme.  The possible 
values are:

    MinLeftPaneWidth=[Yes/No]
    MinLeftPaneWidthValue=[1-350]

  o [4965] Improved the stats report and added a "Statistics" node 
to the Stats  window.  Also, at midnight each night, the postmaster 
and all content filter administrator users will receive the report 
via email.  If this isn't desired the following MDaemon.ini switch 
can disable it:

    [Special]
    SendStatsReport=No (default Yes)

    This is the same report that is generated when MDaemon receives 
the Status command via qualified email.

  o [3639] added separate logging option to enable/disable MultiPOP 
log

  o [4865] added separate logging option to enable/disable DomainPOP 
log

  o [4864] changed UI references to "forward to this host" to 
"forward to this domain" since MX record processing is being 
performed.  Also added some UI text explaining how one can still 
achieve a "forward to this host" A-record only delivery.

  o [4794] removed greylist file cleanup during MDaemon startup  

  o [4798] updated/added warning text when enabling PTR/HELO refusal 
options.

  o [4839] added "Delete Message" IMAP filter rule action

  o [4845] added "Strip X-Spam-Flag header" option to Misc. Options|
Headers UI.
    If you want to strip existing X-Spam-Flag headers from messages 
you will Need to set this switch.  The old MDaemon.ini hack to do 
this has been deprecated.
    
  o [4795] The DNS options "Immediately return mail when DNS says A 
record host not found" and the similar option for MX records have 
been replaced by a single option that will return (bounce) messages 
when there are no MX _or_ A records for a domain.  The GUI was 
appropriately updated.  The option is enabled by default.

  o [4919] Wednesdy logs are now spelled correctly - Wednesday.

  o [4927] Updated MDSpamD to use SA 3.15.

  o [4933] MD will police APP folder for RAS dll and delete it if 
there (to prevent a possible exploit).

  o [4939] The name of the MDaemon service is now always "MDaemon" 
and can not  be changed by users.  The service editor in the UI was 
updated accordingly.
    Also the Network Resource Access text was altered slightly.

  o [4846] Webadmin SSL port will be displayed in the UI when in 
use.
  
  o [4929] Removed 'Close' right-click menu options from all menus.

  o [4957] The plug-in system now supports processing of MultiPOP 
and DomainPOP collected mail.  See plugins.txt for more 
information.

  o [4591] The full name field is now populated for contacts that 
MDaemon adds to the default address book when an account sends 
mail.
  
  o [5039] Reworked the gateways UI to use more consistent 
terminology and to get rid of some of the unneeded text cluttering 
it up.

  o [5040] It is no longer required to first remove a queue from the 
queue editor when disabling a gateway's auto-spool option.

  o [5018] Removed option to "bounce" spam message from the spam 
filter UI.
    If there is a need to bounce a known spam it can still be done 
by setting the following manually in CFilter.ini:

    [SpamFilter]
    BounceSpam=Yes (default no)

    Setting this switch will cause MDaemon to ignore the other spam 
disposition options (delete, spam trap, and flag)

  o [5034] Added option to import original message text into body of 
MDaemon generated DSN messages.  The option is disabled by default 
because this makes the DSN messages twice as big.  To enable, edit 
the following in MDaemon.ini:

    [Special]
    ImportMessageIntoDSN=Yes (default No)

  o [5057] Added "Message Size" test to user-defined IMAP filter 
rules.  This works with the new "is greater than" and "is less 
than" tests which were also added.  It also works with "is equal" 
and "is not equal" tests.

  o [5021] Bayesian learning will no longer take place when using 
external spam daemons (there's no point really).  Also Bayesian 
learning process was some times logging failures needlessly (for 
example, when learning was disabled).

  o [5022] Added option to Misc Options|Misc to enable/disable the 
counting of groupware (non-mail) folders when using disk/file 
quotas.  Also, renamed "Use Strict Quotas" to "Include all inbox 
sub-folders in quota calculation" which is a little more 
descriptive.

  o [5054] The retry queue is now employed for all delivery options.  
The Setup Delivery UI was greatly changed due to this.  So, whether 
you are delivering directly, sending all mail to another server, or 
sending problem mail to an other server, the retry queue should be 
involved.

  o [5027] Added option to Retry UI to move undeliverable DSN 
messages into the bad message folder.  This applies only to DSN's 
that MDaemon has generated.

  o [5042] Police up references to "MDaemon AntiVirus" in 
MDaemon.exe.  Those references should be changed to "SecurityPlus" 
if MDAV version >= 3.00.

  o [5049] Added session window right-click menu option: "Add to IP 
Screen"  which adds the IP address of the selected session entries 
to the "All IPs" section of IP Screen.  

  o [4986] When using Active Directory monitoring and specifying an 
"alias"  value for accounts in ActiveDS.dat MDaemon will append 
'@<domain>' to the expanded value but only if the value doesn't 
already have a '@' char in it.  
    For example, Alias=%givenName%_%sn% (the default) wouldn't 
normally yield a  '@' character whereas Alias=%mail% probably 
would.  In the first case,  '@<domain>' will be appended.  In the 
second, it won't.

  o [4622] Added paging support to WorldClient's task view. This 
should improve the rendering speed for larger task lists.

  o [4971] Added percentage calculations to all relevant sub-nodes 
on Stats tab.

  o [5241] SyncML: Tasks now support a date range filter.  For 
example Tasks?/dr(-7, 7) will only synchronize tasks without a due 
date or where the due date is up to seven days in the past or 
future.

  o [5247] Added composite log switch for logging plugin activity

  o Returned default spam/ham Bayesian required samples to 200 each.

  o [3847] MDStats displays the MDAV and OC registration keys
  o [2887] MDStats supports message sizes larger than 2 GB
  o [4779] MDStats supports directory sizes large than 2 GB
  o [4879] MDStats displays message & directory sizes with thousands 
separators

FIXES
-----

  o fix to Firefox requiring the entire page to reload when an AJAX 
request was  being made in some instances
  o fix to cfengine waiting too long to process a message once 
mdspamd.exe is restarted
  o [4755] fix to Japanese MDaemon signature possibly corrupting 
message text
  o [4771] fix to options in CFilterGUI not grayed when scanner 
disabled
  o [2371] fix the list boxes on the public folder screen of cfilter 
to scroll  if public folder names were long.
  o [4793] fix to PTR "domain not found" closing connection errantly
  o [4804] fix to mdspamd looking for site config paths
  o [4802] fix to mdspamd to not create the spamd-XXXX-init folders 
needlessly
  o [4816] fix to SyncML is unable to synchronize tasks with 
SonyEricsson z520
  o [4821] fix to temp queues cleared on startup (functionality 
deprecated)
  o [4834] fix to ghost unable to create SEM files to signal MDaemon 
for things
  o [4835] fix to CFEngine/MDSpamD process shutting down when Ghost 
starts up
  o [4797] fix to not marked as spam when score exactly equals 
threshold
  o [4847] fix to LogonToNetwork being called and user impersonating 
taking place even when not running as a service
  o [4854] fix to LogonUser() called once/thread rather than 
once/process
  o [4856] fix to "Could not start process X as user Y on domain Z" 
errors (fix needs confirmation).
  o [4857] fix to archival and public folder copies of system 
generated mail going through content filter when not configured to 
do so
  o [4863] fix to crash/corruption when Network Resource Access UI 
saves data
  o [2236] fix to log files not rotating due to ghost session 
connected
  o [4867] fix to errant handling of certain catalog requests
  o [4868] fix to service restarting as an application and not a 
service
  o [4882] fix to wrong CopyFile function getting called at times
  o [4502] fix to the day view not scrolling to the first event or 
the work day  when an all day event exists
  o [4925] fix to % calculations being wrong in the GUI
  o [4941] fix to MDSpamD being restarted needlessly by the UI
  o [4932] fix to filelist-xx.dat file referencing deprecated 
killfile.sup
  o [4938] fix to MDLaunch not stopping/starting MDaemon server/app 
correctly.
    MDLaunch will now always start MDaemon as a service if the 
service exists.
  o [4897] fix to SyncML: Marking task complete does not set date 
completed
  o [4900] fix to SyncML: When synchronizing calendar events, 
changing the date range does add or delete events from the client
  o [4902] fix to SyncML: Date range based on current time rather 
than midnight
  o [4908] fix to SyncML: When sent to the client, the start date 
for recurring events is set to the first occurrence within the date 
filter
  o [4910] fix to SyncML: Recurring events ending on the last day of 
the date filter will not be sent to the client
  o [4911] fix to SyncML: Monthly recurring events sent to the 
client may occur on the wrong day
  o [4912] fix to SyncML: Monthly by day recurrence sends weekday 
information
  o [4913] fix to SyncML: RRULE sent for "last week of month" 
contains "1-+"
  o [4914] fix to SyncML: An event from the client with monthly by 
position recurrence for multiple weekdays will not be added to the 
server
  o [4915] fix to SyncML: Only the first line of a street address is 
sent
  o [4916] fix to SyncML: Commas in contact categories converted to 
semicolons
  o [4917] fix to SyncML: When only one of a contact's email 
addresses or websites is specified, it may appear in the wrong 
field on the client
  o [4915] fix to SyncML: Dates before 1980 are not allowed on some 
clients
  o [4949] fix to Spam Filter UI restarting MDSpamD even when 
clicking Cancel
  o [4945] fix to bad Content-Type header generated from RAW 
messages having attachments to multiple recipients  
  o [4955] fix to plug-in SMTPMessageFunc calls not working for MDAV 
trial keys
  o [4967] fix to UI unable to open OC release notes
  o [4968] fix to purchase/upgrade option not always redirecting to 
correct site
  o [4970] fix to AUTH not working when smart host enclosed in 
brackets
  o [4948] fix to delivery not moving to next MX when A record 
lookup times out
  o [4947] fix to SyncML logs are not overwritten
  o [4898] fix to SyncML not supporting task states "In Progress" 
and "Deferred"
  o [4972] fix to Stats tab counts not initialized properly on 
startup
  o [4973] added msg/per hour stats to UI and statistics report
  o [4742] fix to configuration session whitelist changes not being 
honored without restarting MDaemon
  o [4740] fix to some .cf files getting blanked out when using 
foreign MDSpamD
  o [4688] fix to Empty Trash not working in .XHTML theme
  o [4714] fix to long names wrapping onto two or more lines in the 
LookOut Contacts view
  o [4989] fix to DomainKeys verification of Gmail messages fails
  o [2329] fix to session transcript not included in DSN at times
  o [4866] fix to smart host not used on 4xx errors at start of mail 
session
  o [5008] fix to some plug-in functions working when they shouldn't
  o [5009] fix to About page showing AV trial days left twice
  o [5046] fix to "MAIL FROM" sometimes yields unexpected results 
bug
  o [5020] fix to contact records overwritten with each use of list 
editor
  o [5013] fix to SyncML VCARD parser may not read the type of an 
address of phone number
  o [5029] added support for PLAIN authentication mechanism to IMAP 
server
  o [5033] fix to truncated welcome message subject in Russian 
version
  o [5045] fix to Bayesian learn button disabled in 
ghost/configuration sessions
  o [5047] fix to IPScreenEditor::Add allows banning of local and 
trusted IPs
  o [5050] fix to session window right-click "Print/Copy" doesn't 
work right
  o [4987] fix to greylist whitelist and advanced edit dialogs 
disabled improperly
  o [4984] fix to hard-coded "Select Directory" string in UI
  o [4425] fix to public folder ACL's not updated when user deleted
  o [4556] fix to 530 SMTP error code not generating DSN immediately
  o [5072] fix to .ctl files not removed when .msg deleted using UI
  o [5074] fix to "Create missing reply-to header" option using 
envelope value rather than FROM header value.  This broke BATV and 
VERP systems.
  o [4177] fix to spam filter exclude list not working both ways 
with aliases
  o [5095] fix to remote queue timing out delivery attempts when 
certain SMTP errors occur
  o [4029] fix to authenticated sessions allowed to send to unknown 
local users
  o [5097] fix to WC not updating filters to subfolders of a renamed 
folder
  o [5126] fix to plugin manager object not optimally initializing 
itself
  o [3250] fix to Comagent may crash if an HTTP connection error 
occurs
  o [5124] fix to MD3Conv errantly displaying an upgrade dialog
  o [5127] fix to 127.0.0.1 being allowed as valid A record result 
by resolver
  o [5130] fix to configuration sessions killing CFEngine when they 
shut down
  o [4617] fix to read receipt generated by WC trashing 
international characters
  o [5154] fix to gateways with wild-carded domain names not working 
correctly
  o [5144] fix to trusted IP/domains made via ghost not replicated 
to main MD
  o [5131] fix to many bugs in MDaemon's shutdown sequence
  o [5158] fix to possible CFEngine.exe lockup when trying to create 
temp and work directories
  o [5182] fix to USER_IN_BLACKLIST_TO score being overwritten in 
local.cf
  o [5047] fix to IP screen UI allowing banning of local and trusted 
IPs
  o [5202] fix to possible cfengine.exe queue lockup
  o [5208] fix to weekly recurring event added by SyncML does not 
appear in Outlook (Outlook Connector)
  o fix to some memory leaks in MDaemon and WorldClient
  o [5145] fix to IMAP filter rules showing groupware folders
  o [4806] fix to free/busy data is not available for attendees 
added from the contact picker
  o [4691] fix to invalid calendar XML may cause the Outlook 
Connector to crash
  o [5172] fix to WC compose caching deleted CC field
  o fix to memory leaks in DomainKeys signing and verification
  o [5219] fix to JavaScript error in WorldClient category picker 
applet
  o [5226] fix to potential JavaScript exploit in WorldClient
  o [5237] fix to SyncML: Marking a task as "not completed" on the 
client does  not update the server
  o [5238] fix to SyncML: Calendar events with a new line in the 
comments field will cause SyncBerry to fail
  o [5243] fix to SyncML: Email addresses are not updated when a 
contact is edited on the device
  o [5244] fix to SyncML: A contact with only a company name will 
appear as  "none" or "unnamed" in the contact list on the device
  o (beta only) fix to SyncML: Phone numbers are not updated when a 
contact is edited on the device
  o [5242] fix to changing spam threshold rendering auto-learning 
ineffective
  o [5245] Composite log settings are now in the Logging Options 
rather than the Misc Options GUI.
  o [5246] fix to composite log logging unknown types by default
  o [5249] fix to GUI allowing empty IMAP delimiter character
  o [5210] fix to meeting attendees may not be saved
  o [5211] fix to cannot delete all meeting attendees
  o [5216] fix to EXITNOW.SEM causing thread dead-lock and app not 
exiting
  o [5217] fix to beta and trial end-of-life causing thread 
dead-lock and app not exiting
  o [5218] fix to activation period expiration causing thread 
dead-lock and app not exiting
  o [5203] fix to mail directory possibly ending with ".\" or 
containing ".\"
  o [5225] fix to UI allowing MDSpamD connections/thread > 200
  o [5197] fix to right justified "one per line" toolbars when using 
taskbar

-----------------------------------------------------------------------------


-- 
syafril
-------
Syafril Hermansyah

Attachment: pgpnQcgRFwJC7.pgp
Description: PGP signature

Kirim email ke