hey,
i need to send bank select messages and cant get it quite right.
afaik, i have to send a control message (0xb) where the first value is
0 (bank select).
so the status byte is 0xb0 (assuming we use channel 0) and the first
value byte is 0. so far so good?
now the second value is the actual bank. the manual of my device has
this table about this:
msb lsb
cc00 cc32
user 00 00 bank 0
user 00 01 bank 1
user 00 02 bank 2
user 00 03 bank 3
xtrm 07 00 bank 0
xtrm 07 01 bank 1
xtrm 07 02 bank 2
xtrm 07 03 bank 3
"This chart shows the MSB and LSB numbers needed to select preset
banks over MIDI.
Select a bank, then send the program change number."
now when i use 0x07 for the second value i can select presets from the
xtrm rom bank 0 correctly. but i dont know how to select eg. xtrm rom
bank 1 or user bank 1. i have tried 0x0701 and lots of variations,
without luck. also i dont know what cc00 and cc32 means. any ideas?
ty,
jan
_______________________________________________
media_api mailing list
[email protected]
http://lists.create.ucsb.edu/mailman/listinfo/media_api
