Jay: I think you'll find that at CPI of 10.05, while it lines up good, it actually truncates the right-most character. To test this, put 3 Value Codes/Amounts on 1 account and print the UB04. Then check the Value Code/Amount that appears in FL 41A. I think you'll find that the Amount field is dropping the last 1 or 2 characters.
Gary J. Ring Strategic Resource Group, Inc. 11 Jones Road, Peabody, MA 01960 978-807-1573 -------------- Original message -------------- From: "Jay Gilmore" <[EMAIL PROTECTED]> > Pete and other L members, > > I have seen this topic a lot in the last few months concerning the alignment > of the UB04s. I have only been able to get this to work 1 way on the > HP4250s and HP4350s. > > In the MIS Electronic Forms dictionary, our settings are as follows: > > Orientation PORTRAIT > Paper Size LETTER > CPI 10.05 > Left Margin 0.20 inches > LPI 6 > Top Margin 0.095 inches > Text Len 64 lines > Num Copies 1 > > With these settings, it is perfectly lined up from top to bottom, but not > left to right. We made the following adjustments to the printers per one of > Meditech's suggestions: > > X1 Shift = -14 > Y Shift = +4 > > These settings are found on the printer menu by going to Configure Device -> > Print Quality -> Set Registration -> Adjust Tray X (where X equals the tray > you want to make these setting changes to). Once these changes were made, > the UB04 printed perfectly from left to right. > > It's great if you have a printer dedicated to UBs, but I am not sure how > much printing is affected if the printer is used for multiple jobs other > than UB forms. > > I hope this helps! > > Jay Gilmore > > Systems Analyst > Crisp Regional Hospital > (229) 276-3173 > [EMAIL PROTECTED] > > > -----Original Message----- > From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of > Kane, Pete > Sent: Tuesday, May 15, 2007 5:25 PM > To: meditech-L (E-mail) > Subject: [MEDITECH-L] UB04 Paper Form Alignment > > Hello Everyone: > > I am having alignment issues with my UB04 printing from Meditech on the > following printers: > > Hewlett Packard LaserJet 4200n > Hewlett Packard LaserJet 4250n > > > One problem: I am unable to adjust the MIS Electronic Forms (ELF) Dictionary > LEFT MARGIN from 0.2 to 0.1 (error msg "minimum is 0.20"). > > Do any hospitals out there have any suggestions on getting the UB04 Paper > forms to print on these printers? > > Thanks > Pete Kane > > > > > > > =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*= > To subscribe or unsubscribe to the meditech-l, visit MTUsers.NET. > > To check the status of the meditech-l, visit MTUsers.NET. > > For help, email [EMAIL PROTECTED] > > Visit the MTUsers WikiPedia at MTUsers.NET/mwiki > ______________________________________ > meditech-l mailing list > [email protected] > http://mtusers.com/mailman/listinfo/meditech-l > > =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*= > To subscribe or unsubscribe to the meditech-l, visit MTUsers.NET. > > To check the status of the meditech-l, visit MTUsers.NET. > > For help, email [EMAIL PROTECTED] > > Visit the MTUsers WikiPedia at MTUsers.NET/mwiki > ______________________________________ > meditech-l mailing list > [email protected] > http://mtusers.com/mailman/listinfo/meditech-l
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*= To subscribe or unsubscribe to the meditech-l, visit MTUsers.NET. To check the status of the meditech-l, visit MTUsers.NET. For help, email [EMAIL PROTECTED] Visit the MTUsers WikiPedia at MTUsers.NET/mwiki ______________________________________ meditech-l mailing list [email protected] http://mtusers.com/mailman/listinfo/meditech-l
