Hi, That is the point! Thank you! But I still meet another problem when I run the command
./flasher-3.5 -k /home/nfs/rootfs/boot/vmlinuz-2.6.33.3-11.2-n900 -n initrd.img -l -b"root=/dev/ram0" ; sleep 5 ; sudo ifconfig usb0 192.168.2.14 following the instruction http://wiki.meego.com/ARM/N900/Install/NFS error info: USB device found found at bus 001, device address 014. Using flashing protocol Mk II. Method is not supported in the current mode It really confused me.What is the problem? Thank you! Br Zheng On Wed, Jun 2, 2010 at 3:40 PM, Carsten Munk <[email protected]> wrote: > 2010/6/2 Zheng Zhang <[email protected]>: > > Hi, > > I met a problem when I followed the instruction > > http://wiki.meego.com/ARM/N900/Install/NFS > > command : > > mount -o loop,offset=512 meego-n900-open-armv7l-1.0.0.20100525.1-sda.raw > > temp > > error info: > > mount: you must specify the filesystem type > > > > so what is the file type of > meego-n900-open-armv7l-1.0.0.20100525.1-sda.raw? > > I download and bunzip it from > > > http://repo.meego.com/MeeGo/releases/1.0/core/images/meego-n900-open-armv7l/ > > > > command: > > file meego-n900-open-armv7l-1.0.0.20100525.1-sda.raw > > > > meego-n900-open-armv7l-1.0.0.20100525.1-sda.raw: x86 boot sector; > partition > > 1: ID=0x83, starthead 1, startsector 32, 3417952 sectors, code offset > 0xb8 > > > > I can highly recommend the tool 'kpartx' (kpartx -a), which makes > /dev/mapper/loop0p1 and such for you to mount. > > Regards, > Carsten Munk >
_______________________________________________ MeeGo-dev mailing list [email protected] http://lists.meego.com/listinfo/meego-dev
