Hi, It seems the Congatec IVI kit is no longer available. :-( The information on Pelagicore seems limited, which makes it difficult for us to evaluate it. Do you know when is the board expected to be available?
We will look into the Intel dev board, but do you know of any other options? Does Congatec or any other vendor have a solutions that is avaialble and works well with MeeGo IVI? Ideally, we would find a good hardware setup that allows to focus on applications and less on getting the system to work. Thanks for any help, -Aschwin >-----Original Message----- >From: [email protected] [mailto:[email protected]] >On Behalf Of Rudolf Streif >Sent: 10 January 2011 18:44 >To: Vanderwoude Aschwin >Cc: [email protected]; [email protected] >Subject: Re: [MeeGo-ivi] MeeGo IVI refence hardware? > >Hi Aschwin, > >The Congatec IVI dev kit is well supported by MeeGo IVI. It >runs and installs out of the box. However, there is currently >no CAN or MOST support in MeeGo IVI. Supporting these >protocols/interfaces as well as supporting AVnu AVB is part of >the MeeGo IVI Automotive Network Manager design headed by >Pelagicore's CTO Mikael Soederberg. > >Pelagicore also has designed a daughter board containing IVI >interfaces etc. for the BeagleBoard xM. They offered to >open-source the design and we are also looking into having the >board built and distributed. However, that is an new >initiative and a couple of weeks down the road. Pricing is not >yet available but it is expected to be only a couple of >hundred USD. We are also evaluating the possibility of >adapting this daughter board to the Intel Embedded Development >Board 1-N450 ( >http://edc.intel.com/Platforms/Atom-N450-D410-D510/Development- >Board/). However, this is in a very early stage and requires >engineering effort. > > >Best regards, >Rudi > > >On Mon, Jan 10, 2011 at 4:35 AM, <[email protected]> wrote: > > > Hi, > > Thanks for the pointer. > How well is the Congatec IVI dev-kit supported by MeeGo-IVI? > E.g. does it have a fully supported graphics hardware >(i.e. acceleration)? Does MeeGo support the CAN-bus adapter, etc? > > -Aschwin > > >-----Original Message----- > >From: Henri Laitinen [mailto:[email protected]] > >Sent: 10 January 2011 13:36 > >To: Henri Laitinen > >Cc: Maloney, Gerard; Vanderwoude Aschwin; >[email protected] > >Subject: Re: [MeeGo-ivi] MeeGo IVI refence hardware? > > > > >On Mon, Jan 10, 2011 at 01:21:06PM +0200, Henri Laitinen wrote: > >> On Mon, Jan 10, 2011 at 11:02:20AM +0000, Maloney, >Gerard wrote: > >> > If you want a automotive reference platform , Intel has two > >> > automotive > >> > platforms: (www.edc.intel.com) > >> > > >> 'www.edc.intel.com' down, 'edc.intel.com' works instead. :) > > >> > >> > Russelville ( Menlow based atom) available from Congatec > >Northville > >> > ( Tunnelcreek based atom) limited availability from Intel. > >> > > >> > > >> <snip> > >> > >> -- > >> Henri Laitinen > > > > _______________________________________________ > MeeGo-ivi mailing list > [email protected] > http://lists.meego.com/listinfo/meego-ivi > > > > > >-- >Rudolf J. Streif >Director of Embedded Solutions > > >[email protected] >Mobile: +1 858 583 1683 >Skype: rudolfstreif > > >The Linux Foundation >1796 18th Street, Suite C >San Francisco, CA 94107 >Fax: +1 415 723 9709 >http://www.linuxfoundation.org/ >http://www.linux.com > > _______________________________________________ MeeGo-ivi mailing list [email protected] http://lists.meego.com/listinfo/meego-ivi
