Hello,
There are two problems relative to kernel-adaptation-mrst-2.6.37-15.1 on
MRST platform.
1. System failed when booting
The full log is as attachment (log_1.txt).
After marking off
arch/x86/platform/mrst/pmu.c
line 665: "pmu_scu_firmware_debug();",
system works.
2. Compile error
If CONFIG_DRM_MDFLD=n,
get compile error as attachment (log_2.txt).
Fix by moving drivers/staging/mrst/drv/psb_drv.c
line 2190: "static int pipe = 0;"
to inside of "#elif defined(CONFIG_MDFLD_DSI_DSR)",
problem is solved.
Sincerely,
Major Lee
cp
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxinit.c
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxinit.mrst.c
CC [M]
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxinit.mrst.o
cp
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxpower.c
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxpower.mrst.c
CC [M]
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxpower.mrst.o
cp
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxreset.c
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxreset.mrst.c
CC [M]
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxreset.mrst.o
cp
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxutils.c
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxutils.mrst.c
CC [M]
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxutils.mrst.o
cp
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxkick.c
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxkick.mrst.c
CC [M]
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxkick.mrst.o
cp
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxtransfer.c
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxtransfer.mrst.c
CC [M]
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/sgxtransfer.mrst.o
cp
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/mmu.c
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/mmu.mrst.c
CC [M]
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/mmu.mrst.o
cp drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/pb.c
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/pb.mrst.c
CC [M]
drivers/staging/mrst/moorestown/../pvr/services4/srvkm/devices/sgx/pb.mrst.o
cp
drivers/staging/mrst/moorestown/../pvr/services4/3rdparty/linux_framebuffer_mrst/mrstlfb_displayclass.c
drivers/staging/mrst/moorestown/../pvr/services4/3rdparty/linux_framebuffer_mrst/mrstlfb_displayclass.mrst.c
CC [M]
drivers/staging/mrst/moorestown/../pvr/services4/3rdparty/linux_framebuffer_mrst/mrstlfb_displayclass.mrst.o
cp
drivers/staging/mrst/moorestown/../pvr/services4/3rdparty/linux_framebuffer_mrst/mrstlfb_linux.c
drivers/staging/mrst/moorestown/../pvr/services4/3rdparty/linux_framebuffer_mrst/mrstlfb_linux.mrst.c
CC [M]
drivers/staging/mrst/moorestown/../pvr/services4/3rdparty/linux_framebuffer_mrst/mrstlfb_linux.mrst.o
cp drivers/staging/mrst/moorestown/../drv/psb_bl.c
drivers/staging/mrst/moorestown/../drv/psb_bl.mrst.c
CC [M] drivers/staging/mrst/moorestown/../drv/psb_bl.mrst.o
cp drivers/staging/mrst/moorestown/../drv/psb_dpst.c
drivers/staging/mrst/moorestown/../drv/psb_dpst.mrst.c
CC [M] drivers/staging/mrst/moorestown/../drv/psb_dpst.mrst.o
cp drivers/staging/mrst/moorestown/../drv/psb_drv.c
drivers/staging/mrst/moorestown/../drv/psb_drv.mrst.c
CC [M] drivers/staging/mrst/moorestown/../drv/psb_drv.mrst.o
cc1: warnings being treated as errors
drivers/staging/mrst/moorestown/../drv/psb_drv.mrst.c: In function
'psb_dpu_dsr_off_ioctl':
drivers/staging/mrst/moorestown/../drv/psb_drv.mrst.c:2190:13: error: unused
variable 'pipe'
make[4]: *** [drivers/staging/mrst/moorestown/../drv/psb_drv.mrst.o] Error 1
rm drivers/staging/mrst/moorestown/../drv/psb_drv.mrst.c
make[3]: *** [drivers/staging/mrst/moorestown] Error 2
make[2]: *** [drivers/staging/mrst] Error 2
make[1]: *** [drivers/staging] Error 2
make: *** [drivers] Error 2
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37 (major@major-f1100) (gcc version 4.5.1
(Sourcery G++ Lite 2010.09-44) ) #1 SMP PREEMPT Thu Mar 17 16:45:02 CST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000100 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001c500000 (usable)
[ 0.000000] BIOS-e820: 000000001c500000 - 000000001ee00000 (reserved)
[ 0.000000] BIOS-e820: 000000001ee00000 - 000000003c788000 (usable)
[ 0.000000] BIOS-e820: 000000003c788000 - 000000003c7c2000 (reserved)
[ 0.000000] BIOS-e820: 000000003c7ff000 - 000000003c8ff000 (reserved)
[ 0.000000] BIOS-e820: 000000003c8ff000 - 000000003c900000 (usable)
[ 0.000000] BIOS-e820: 000000003f200000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] bootconsole [earlymrst0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: MM/MM, BIOS MM.03.60.05.11.15 02/16/2011 07:00:00
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3c900 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0E0000000 write-back
[ 0.000000] 1 base 020000000 mask 0F0000000 write-back
[ 0.000000] 2 base 030000000 mask 0F8000000 write-back
[ 0.000000] 3 base 038000000 mask 0FC000000 write-back
[ 0.000000] 4 base 03C000000 mask 0FF800000 write-back
[ 0.000000] 5 base 03C800000 mask 0FFF00000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] Warning only 895MB will be used.
[ 0.000000] Use a HIGHMEM enabled kernel.
[ 0.000000] initial memory mapped : 0 - 02200000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037f14000
[ 0.000000] 0000000000 - 0037f14000 page 4k
[ 0.000000] kernel direct mapping tables up to 37f14000 @ 203d000-2200000
[ 0.000000] RAMDISK: 3c18d000 - 3c77e000
[ 0.000000] Allocated new RAMDISK: 37923000 - 37f13460
[ 0.000000] Move RAMDISK from 000000003c18d000 - 000000003c77d45f to
37923000 - 37f1345f
[ 0.000000] 895MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37f14000
[ 0.000000] low ram: 0 - 37f14000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037f14
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001c500
[ 0.000000] 0: 0x0001ee00 -> 0x00037f14
[ 0.000000] On node 0 totalpages: 218531
[ 0.000000] free_area_init_node: node 0, pgdat c17d3200, node_mem_map
dbe00200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1759 pages used for memmap
[ 0.000000] Normal zone: 212789 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] SFI: SYST FE120, 0078 (v1 INTEL MOORESTW)
[ 0.000000] SFI: XSDT FE1B0, 002C (v1 INTEL MOORESTW)
[ 0.000000] SFI: APIC FE230, 0020 (v1 INTEL MOORESTW)
[ 0.000000] SFI: CPUS FE250, 0020 (v1 INTEL MOORESTW)
[ 0.000000] SFI: FREQ FE270, 0078 (v1 INTEL MOORESTW)
[ 0.000000] SFI: IDLE FE2F0, 0038 (v1 INTEL MOORESTW)
[ 0.000000] SFI: MMAP FE330, 0210 (v1 INTEL MOORESTW)
[ 0.000000] SFI: MRTC FE7D0, 0024 (v1 INTEL MOORESTW)
[ 0.000000] SFI: MTMR FE800, 0058 (v2 INTEL MOORESTW)
[ 0.000000] SFI: WAKE FE860, 0020 (v2 INTEL MOORESTW)
[ 0.000000] SFI: DEVS FE890, 018F (v1 INTEL MOORESTW)
[ 0.000000] SFI: GPIO FEA20, 027C (v1 INTEL MOORESTW)
[ 0.000000] SFI: OEMB FECA0, 0032 (v2 WISTRO MOORESTW)
[ 0.000000] SFI: Boot CPU = 0
[ 0.000000] SFI: registering lapic[0]
[ 0.000000] SFI: registering lapic[1]
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-37
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 54
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
40000000:a0000000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @dba00000 s26688 r0 d22464 u1048576
[ 0.000000] pcpu-alloc: s26688 r0 d22464 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 216740
[ 0.000000] Kernel command line: root=/dev/mmcblk1p1 rw pci=noearly
console=ttyS0 earlyprintk=mrst loglevel=8 s0ix_latency=160
kexec_jump_back_entry=0xf7531000
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4582480 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] Memory: 839692k/916560k available (5099k kernel code, 34432k
reserved, 3019k data, 364k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] vmalloc : 0xf8714000 - 0xfff14000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7f14000 ( 895 MB)
[ 0.000000] .init : 0xc17ee000 - 0xc1849000 ( 364 kB)
[ 0.000000] .data : 0xc14faeb9 - 0xc17edc18 (3019 kB)
[ 0.000000] .text : 0xc1000000 - 0xc14faeb9 (5099 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f7408000 soft=f740a000
[ 0.000000] vRTC: sec: 51 min: 18 hour: 5 day: 1 mon: 1 year: 1960
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3567 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000000] Early APIC setup for system timer0
[ 0.000000] TSC freq calculated by APB timer is 1600000 khz
[ 0.000000] Detected 1600.000 MHz processor.
[ 0.003058] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3200.00 BogoMIPS (lpj=1600000)
[ 0.005029] pid_max: default: 32768 minimum: 301
[ 0.008206] Mount-cache hash table entries: 512
[ 0.015414] Initializing cgroup subsys ns
[ 0.016032] ns_cgroup deprecated: consider using the 'clone_children' flag
without the ns_cgroup.
[ 0.017034] Initializing cgroup subsys cpuacct
[ 0.018075] Initializing cgroup subsys memory
[ 0.019417] Initializing cgroup subsys devices
[ 0.020040] Initializing cgroup subsys freezer
[ 0.021034] Initializing cgroup subsys blkio
[ 0.023689] CPU: Physical Processor ID: 0
[ 0.024029] CPU: Processor Core ID: 0
[ 0.025028] mce: CPU supports 5 MCE banks
[ 0.026072] CPU0: Thermal LVT vector (0xfa) already installed
[ 0.027035] using mwait in idle threads.
[ 0.028049] Performance Events: PEBS fmt0+, generic architected perfmon,
Intel PMU driver.
[ 0.032030] ... version: 3
[ 0.033025] ... bit width: 40
[ 0.034025] ... generic registers: 2
[ 0.035025] ... value mask: 000000ffffffffff
[ 0.036025] ... max period: 000000007fffffff
[ 0.037024] ... fixed-purpose events: 3
[ 0.038025] ... event mask: 0000000700000003
[ 0.041396] SFI: MCFG FE1F0, 003C (v1 INTEL MOORESTW)
[ 0.043569] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.045057] CPU0: Genuine Intel(R) CPU @ 1.60GHz stepping 01
[ 0.053120] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.063302] lockdep: fixing up alternatives.
[ 0.067188] CPU 1 irqstacks, hard=f7544000 soft=f7546000
[ 0.068058] Booting Node 0, Processors #1 Ok.
[ 0.003999] Initializing CPU#1
[ 0.003999] CPU1: Thermal LVT vector (0xfa) already installed
[ 0.003999] Init per CPU clockevent 1
[ 0.159721] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.142486] Registering CPU 1 clockevent device apbt1, mask 00000002
[ 0.162102] Brought up 2 CPUs
[ 0.163041] Total of 2 processors activated (6399.92 BogoMIPS).
[ 0.172312] SFI: SFI sysfs interfaces init success
[ 0.193880] Time: 165:165:165 Date: 165/165/65
[ 0.196559] NET: Registered protocol family 16
[ 0.207048] mid_pci_init is called
[ 0.208956] PCI: Using configuration type 1 for base access
[ 0.265342] bio: create slab <bio-0> at 0
[ 0.270058] vgaarb: loaded
[ 0.274292] SCSI subsystem initialized
[ 0.280292] libata version 3.00 loaded.
[ 0.282362] usbcore: registered new interface driver usbfs
[ 0.283352] usbcore: registered new interface driver hub
[ 0.284332] usbcore: registered new device driver usb
[ 0.297534] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.306271] Moorestown platform detected, using MRST PCI ops
[ 0.317061] PCI: MMCONFIG for domain 0000 [bus 00-00] at [mem
0x3f200000-0x3f2fffff] (base 0x3f200000)
[ 0.335035] PCI: MMCONFIG at [mem 0x3f200000-0x3f2fffff] reserved in E820
[ 0.349031] PCI: Using MMCONFIG for extended config space
[ 0.359030] PCI: Probing PCI hardware
[ 0.366130] PCI: Probing PCI hardware (bus 00)
[ 0.376099] pci 0000:00:00.0: [8086:4110] type 0 class 0x000600
[ 0.387599] pci 0000:00:00.1: [8086:0800] type 0 class 0x000780
[ 0.398140] pci 0000:00:00.1: reg 10: [mem 0xff128000-0xff1283ff]
[ 0.410403] pci 0000:00:00.1: PME# supported from D0 D3hot
[ 0.421050] pci 0000:00:00.1: PME# disabled
[ 0.429176] pci 0000:00:00.2: [8086:0801] type 0 class 0x000780
[ 0.440159] pci 0000:00:00.2: reg 10: [mem 0xff129000-0xff1293ff]
[ 0.452414] pci 0000:00:00.2: PME# supported from D0 D3hot
[ 0.463050] pci 0000:00:00.2: PME# disabled
[ 0.471175] pci 0000:00:00.3: [8086:0802] type 0 class 0x000780
[ 0.483139] pci 0000:00:00.3: reg 10: [mem 0xff12a000-0xff12a3ff]
[ 0.495438] pci 0000:00:00.3: PME# supported from D0 D3hot
[ 0.505047] pci 0000:00:00.3: PME# disabled
[ 0.514177] pci 0000:00:00.4: [8086:0803] type 0 class 0x000780
[ 0.525140] pci 0000:00:00.4: reg 10: [mem 0xff130000-0xff1303ff]
[ 0.537409] pci 0000:00:00.4: PME# supported from D0 D3hot
[ 0.548050] pci 0000:00:00.4: PME# disabled
[ 0.556175] pci 0000:00:00.5: [8086:0804] type 0 class 0x000780
[ 0.567158] pci 0000:00:00.5: reg 10: [mem 0xff131000-0xff1313ff]
[ 0.579406] pci 0000:00:00.5: PME# supported from D0 D3hot
[ 0.590050] pci 0000:00:00.5: PME# disabled
[ 0.598175] pci 0000:00:00.6: [8086:0805] type 0 class 0x000900
[ 0.610139] pci 0000:00:00.6: reg 10: [mem 0xff12d000-0xff12d3ff]
[ 0.622444] pci 0000:00:00.6: PME# supported from D0 D3hot
[ 0.632044] pci 0000:00:00.6: PME# disabled
[ 0.641175] pci 0000:00:00.7: [8086:0806] type 0 class 0x000c03
[ 0.652140] pci 0000:00:00.7: reg 10: [mem 0xffa80000-0xffafffff]
[ 0.664091] pci 0000:00:00.7: reg 14: [mem 0xffff3000-0xffffafff]
[ 0.676390] pci 0000:00:00.7: PME# supported from D0 D3hot
[ 0.687050] pci 0000:00:00.7: PME# disabled
[ 0.695176] pci 0000:00:01.0: [8086:0807] type 0 class 0x000805
[ 0.706094] pci 0000:00:01.0: reg 10: [mem 0xffa50000-0xffa500ff]
[ 0.718299] pci 0000:00:01.0: PME# supported from D0 D3hot
[ 0.729050] pci 0000:00:01.0: PME# disabled
[ 0.737177] pci 0000:00:01.1: [8086:0808] type 0 class 0x000805
[ 0.749139] pci 0000:00:01.1: reg 10: [mem 0xffa58000-0xffa580ff]
[ 0.761439] pci 0000:00:01.1: PME# supported from D0 D3hot
[ 0.771050] pci 0000:00:01.1: PME# disabled
[ 0.779194] pci 0000:00:01.2: [8086:0809] type 0 class 0x000180
[ 0.791138] pci 0000:00:01.2: reg 10: [mem 0xffa40000-0xffa47fff]
[ 0.803090] pci 0000:00:01.2: reg 14: [mem 0xffa48000-0xffa4ffff]
[ 0.815394] pci 0000:00:01.2: PME# supported from D0 D3hot
[ 0.826055] pci 0000:00:01.2: PME# disabled
[ 0.834176] pci 0000:00:01.3: [8086:080a] type 0 class 0x000401
[ 0.845139] pci 0000:00:01.3: reg 10: [mem 0xffae6000-0xffae63ff]
[ 0.857090] pci 0000:00:01.3: reg 14: [mem 0xffae8000-0xffaeffff]
[ 0.869090] pci 0000:00:01.3: reg 18: [mem 0xffff1000-0xffff2fff]
[ 0.881089] pci 0000:00:01.3: reg 1c: [mem 0xffb00000-0xffb7ffff]
[ 0.893089] pci 0000:00:01.3: reg 20: [mem 0xffb80000-0xffbfffff]
[ 0.905257] pci 0000:00:01.3: PME# supported from D0 D3hot
[ 0.915052] pci 0000:00:01.3: PME# disabled
[ 0.924182] pci 0000:00:01.4: [8086:080b] type 0 class 0x000404
[ 0.935139] pci 0000:00:01.4: reg 10: [mem 0xff0e0000-0xff0fffff]
[ 0.947090] pci 0000:00:01.4: reg 14: [mem 0x3f300000-0x3f6fffff]
[ 0.959394] pci 0000:00:01.4: PME# supported from D0 D3hot
[ 0.970050] pci 0000:00:01.4: PME# disabled
[ 0.978176] pci 0000:00:01.5: [8086:080c] type 0 class 0x001080
[ 0.989146] pci 0000:00:01.5: reg 10: [mem 0xff0d0000-0xff0dffff]
[ 1.001349] pci 0000:00:01.5: PME# supported from D0 D3hot
[ 1.012073] pci 0000:00:01.5: PME# disabled
[ 1.020178] pci 0000:00:01.6: [8086:080d] type 0 class 0x000380
[ 1.032139] pci 0000:00:01.6: reg 10: [mem 0xff009000-0xff0093ff]
[ 1.044439] pci 0000:00:01.6: PME# supported from D0 D3hot
[ 1.054051] pci 0000:00:01.6: PME# disabled
[ 1.062190] pci 0000:00:01.7: [8086:080e] type 0 class 0x000b40
[ 1.074139] pci 0000:00:01.7: reg 10: [mem 0xff11c000-0xff11c3ff]
[ 1.086091] pci 0000:00:01.7: reg 14: [mem 0xff12b000-0xff12bfff]
[ 1.098395] pci 0000:00:01.7: PME# supported from D0 D3hot
[ 1.109051] pci 0000:00:01.7: PME# disabled
[ 1.117182] pci 0000:00:02.0: [8086:4102] type 0 class 0x000300
[ 1.128135] pci 0000:00:02.0: reg 10: [mem 0xff200000-0xff2fffff]
[ 1.140086] pci 0000:00:02.0: reg 14: [io 0x1000-0x1007]
[ 1.151083] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff]
[ 1.163093] pci 0000:00:02.0: reg 1c: [mem 0xcffc0000-0xcfffffff]
[ 1.175416] pci 0000:00:02.1: [8086:080f] type 0 class 0x000880
[ 1.186136] pci 0000:00:02.1: reg 10: [mem 0xff12c000-0xff12c3ff]
[ 1.198092] pci 0000:00:02.1: reg 14: [mem 0x3c8fdc90-0x3c8fdc9f]
[ 1.210400] pci 0000:00:02.1: PME# supported from D0 D3hot
[ 1.221051] pci 0000:00:02.1: PME# disabled
[ 1.229177] pci 0000:00:02.2: [8086:0810] type 0 class 0x000b40
[ 1.240110] pci 0000:00:02.2: reg 10: [mem 0xff11d000-0xff11dfff]
[ 1.252255] pci 0000:00:02.2: PME# supported from D0 D3hot
[ 1.263051] pci 0000:00:02.2: PME# disabled
[ 1.271178] pci 0000:00:02.3: [8086:0811] type 0 class 0x000c03
[ 1.283139] pci 0000:00:02.3: reg 10: [mem 0xffa60000-0xffa7ffff]
[ 1.295092] pci 0000:00:02.3: reg 14: [mem 0xffff8000-0xffffbfff]
[ 1.306412] pci 0000:00:02.3: PME# supported from D0 D3hot
[ 1.317053] pci 0000:00:02.3: PME# disabled
[ 1.325120] pci 0000:00:02.4: [8086:0812] type 0 class 0x000780
[ 1.337135] pci 0000:00:02.4: reg 10: [mem 0xff12e000-0xff12e3ff]
[ 1.349439] pci 0000:00:02.4: PME# supported from D0 D3hot
[ 1.359068] pci 0000:00:02.4: PME# disabled
[ 1.368178] pci 0000:00:02.5: [8086:0813] type 0 class 0x000880
[ 1.379140] pci 0000:00:02.5: reg 10: [mem 0xff11f000-0xff11f7ff]
[ 1.391317] pci 0000:00:02.5: PME# supported from D0 D3hot
[ 1.402050] pci 0000:00:02.5: PME# disabled
[ 1.410178] pci 0000:00:02.6: [8086:0814] type 0 class 0x000880
[ 1.422148] pci 0000:00:02.6: reg 10: [mem 0xffaf8000-0xffafffff]
[ 1.433458] pci 0000:00:02.6: PME# supported from D0 D3hot
[ 1.444053] pci 0000:00:02.6: PME# disabled
[ 1.452117] pci 0000:00:02.7: [8086:0815] type 0 class 0x000880
[ 1.464140] pci 0000:00:02.7: reg 10: [mem 0xffae4000-0xffae43ff]
[ 1.476440] pci 0000:00:02.7: PME# supported from D0 D3hot
[ 1.486065] pci 0000:00:02.7: PME# disabled
[ 1.495218] pci 0000:00:03.0: [8086:084f] type 0 class 0x000805
[ 1.506141] pci 0000:00:03.0: reg 10: [mem 0xffa5c000-0xffa5c0ff]
[ 1.518326] pci 0000:00:03.0: PME# supported from D0 D3hot
[ 1.529050] pci 0000:00:03.0: PME# disabled
[ 1.549622] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.564625] PCI: pci_cache_line_size set to 64 bytes
[ 1.569783] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 1.581051] reserve RAM buffer: 000000001c500000 - 000000001fffffff
[ 1.593053] reserve RAM buffer: 000000003c788000 - 000000003fffffff
[ 1.606072] reserve RAM buffer: 000000003c900000 - 000000003fffffff
[ 1.621412] Bluetooth: Core ver 2.15
[ 1.625202] NET: Registered protocol family 31
[ 1.634035] Bluetooth: HCI device and connection manager initialized
[ 1.646136] Bluetooth: HCI socket layer initialized
[ 1.657570] cfg80211: Calling CRDA to update world regulatory domain
[ 1.675871] BUG: unable to handle kernel NULL pointer dereference at 0000002c
[ 1.675999] IP: [<c14d77a3>] klist_put+0x12/0x67
[ 1.675999] *pdpt = 0000000000000000 *pde = 000000005a5a5a5a
[ 1.675999] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 1.675999] last sysfs file:
[ 1.675999] Modules linked in:
[ 1.675999]
[ 1.675999] Pid: 1, comm: swapper Not tainted 2.6.37 #1 MM/MM
[ 1.675999] EIP: 0060:[<c14d77a3>] EFLAGS: 00010246 CPU: 0
[ 1.675999] EIP is at klist_put+0x12/0x67
[ 1.675999] EAX: 00000000 EBX: c085ffe9 ECX: c14d76f1 EDX: 00000000
[ 1.675999] ESI: 00000000 EDI: 00000000 EBP: f7497e38 ESP: f7497e28
[ 1.675999] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 1.675999] Process swapper (pid: 1, ti=f7496000 task=f7494030
task.ti=f7496000)
[ 1.675999] Stack:
[ 1.675999] c14d76f1 f7497e50 c176cbb8 00000000 f7497e44 c14d780c f7497e50
f7497e64
[ 1.675999] c1233784 f76c8980 f75abf48 c085ffe9 f7497ee8 00000000 f76c8980
f7497e7c
[ 1.675999] c11d31f6 c11d314a f76c8980 00000000 00000038 f7497e9c c11d349c
ffffffff
[ 1.675999] Call Trace:
[ 1.675999] [<c14d76f1>] ? klist_next+0x7b/0x93
[ 1.675999] [<c14d780c>] ? klist_iter_exit+0x14/0x1e
[ 1.675999] [<c1233784>] ? bus_find_device+0x5e/0x68
[ 1.675999] [<c11d31f6>] ? pci_get_dev_by_id+0x44/0x62
[ 1.675999] [<c11d314a>] ? match_pci_dev_by_id+0x0/0x68
[ 1.675999] [<c11d349c>] ? pci_get_subsys+0x101/0x12f
[ 1.675999] [<c11d34d8>] ? pci_get_device+0xe/0x10
[ 1.675999] [<c14da6d9>] ? pmu_probe+0x1ad/0x21a
[ 1.675999] [<c1239ae9>] ? pm_runtime_enable+0x53/0x5b
[ 1.675999] [<c11d25aa>] ? local_pci_probe+0x3b/0x7e
[ 1.675999] [<c11d28ae>] ? pci_device_probe+0x48/0x6b
[ 1.675999] [<c123474e>] ? driver_probe_device+0xed/0x1a7
[ 1.675999] [<c1234852>] ? __driver_attach+0x4a/0x66
[ 1.675999] [<c123393c>] ? bus_for_each_dev+0x3d/0x5f
[ 1.675999] [<c123441c>] ? driver_attach+0x14/0x16
[ 1.675999] [<c1234808>] ? __driver_attach+0x0/0x66
[ 1.675999] [<c12340e6>] ? bus_add_driver+0x170/0x2b6
[ 1.675999] [<c1234a1f>] ? driver_register+0x77/0xd6
[ 1.675999] [<c11c4319>] ? __raw_spin_lock_init+0x28/0x4b
[ 1.675999] [<c11d2a82>] ? __pci_register_driver+0x4c/0xa9
[ 1.675999] [<c101bf5b>] ? cache_k8_northbridges+0x62/0x107
[ 1.675999] [<c17ff487>] ? pmu_pci_register+0x14/0x16
[ 1.675999] [<c100112d>] ? do_one_initcall+0x71/0x118
[ 1.675999] [<c17ff473>] ? pmu_pci_register+0x0/0x16
[ 1.675999] [<c17ee8ae>] ? kernel_init+0x132/0x1b3
[ 1.675999] [<c17ee77c>] ? kernel_init+0x0/0x1b3
[ 1.675999] [<c1002d7a>] ? kernel_thread_helper+0x6/0x10
[ 1.675999] Code: 75 ce b8 74 31 7d c1 e8 81 1f 02 00 c7 43 f4 00 00 00 00
59 5b 5e 5f 5d c3 55 89 e5 57 56 53 89 c3 83 ec 04 8b 30 83 e6 fe 89 f0 <8b> 7e
2c 88 55 f0 e8 ff 18 02 00 8a 55 f0 84 d2 74 17 f6 03 01
[ 1.675999] EIP: [<c14d77a3>] klist_put+0x12/0x67 SS:ESP 0068:f7497e28
[ 1.675999] CR2: 000000000000002c
_______________________________________________
MeeGo-kernel mailing list
[email protected]
http://lists.meego.com/listinfo/meego-kernel
