Subject: Correct ar6003 MakeFile
1. MEEGO_ENV not MEEGO_EN
2. CONFIG_AR6003_HCI_BRIDGE = y must set AR600x_BT_AR3001
otherwise BT AR3001 will be set baud rate 0
Signed-off-by: Samuel Chang <[email protected]>
diff -ruN kernel-2.6.37.6-11.5/drivers/staging/ar6003/Makefile
kernel-2.6.37.6-11.5_mod_MakeFile/drivers/staging/ar6003/Makefile
--- kernel-2.6.37.6-11.5/drivers/staging/ar6003/Makefile 2011-05-27
06:16:59.000000000 +0800
+++ kernel-2.6.37.6-11.5_mod_MakeFile/drivers/staging/ar6003/Makefile
2011-06-01 18:46:21.851755736 +0800
@@ -31,7 +31,7 @@
-DATH_AR6K_11N_SUPPORT \
-DATH_SUPPORT_DFS \
-DWAPI_ENABLE \
- -DMEEGO_EN #\
+ -DMEEGO_ENV #\
-DMULTIPLE_FRAMES_PER_INTERRUPT \
-DBLOCK_TX_PATH_FLAG -DCHECKSUM_OFFLOAD \
@@ -60,7 +60,7 @@
endif
ifeq ($(CONFIG_AR6003_HCI_BRIDGE),y)
- EXTRA_CFLAGS += -DSETUPHCI_ENABLED -DSETUPBTDEV_ENABLED
+ EXTRA_CFLAGS += -DSETUPHCI_ENABLED -DSETUPBTDEV_ENABLED -DAR600x_BT_AR3001
endif
ifeq ($(CONFIG_AR6003_HCI_PAL),y)
Subject: Correct ar6003 MakeFile
Signed-off-by: Samuel Chang <[email protected]>
diff -ruN kernel-2.6.37.6-11.5/drivers/staging/ar6003/Makefile kernel-2.6.37.6-11.5_mod_MakeFile/drivers/staging/ar6003/Makefile
--- kernel-2.6.37.6-11.5/drivers/staging/ar6003/Makefile 2011-05-27 06:16:59.000000000 +0800
+++ kernel-2.6.37.6-11.5_mod_MakeFile/drivers/staging/ar6003/Makefile 2011-06-01 18:46:21.851755736 +0800
@@ -31,7 +31,7 @@
-DATH_AR6K_11N_SUPPORT \
-DATH_SUPPORT_DFS \
-DWAPI_ENABLE \
- -DMEEGO_EN #\
+ -DMEEGO_ENV #\
-DMULTIPLE_FRAMES_PER_INTERRUPT \
-DBLOCK_TX_PATH_FLAG -DCHECKSUM_OFFLOAD \
@@ -60,7 +60,7 @@
endif
ifeq ($(CONFIG_AR6003_HCI_BRIDGE),y)
- EXTRA_CFLAGS += -DSETUPHCI_ENABLED -DSETUPBTDEV_ENABLED
+ EXTRA_CFLAGS += -DSETUPHCI_ENABLED -DSETUPBTDEV_ENABLED -DAR600x_BT_AR3001
endif
ifeq ($(CONFIG_AR6003_HCI_PAL),y)
_______________________________________________
MeeGo-kernel mailing list
[email protected]
http://lists.meego.com/listinfo/meego-kernel
