Can someone please check my list at what RPM maximum power and torque
occur according to Nissan on stock L16, L18, L18SSS and L20B. Also inlet
valve lift and duration if possible. Non-pollution models. Here's what I
have:
1600(510) L16 96hp@5600rpm, 98.8ft/lb@3600rpm, 10.0mm lift, ? deg
1600(510) L16SSS 109hp@6000rpm, 103.4ft/lb@4000rpm, 10.5mm lift, ? deg
Stanza SSS?(A10) L16 110@6200rpm, 99.8ft/lb@4000rpm, 10.5mm lift, 240deg
180B(610) L18 96@5600rpm, ? @3600rpm, 10.5mm lift, 240deg
180B(610) L18SSS 110@6000rpm 108ft/lb@4000rpm, 11.0mm lift, 248deg
200B(810?) L20B hp@ ? rpm tq@ ? rpm, ? lift, ? deg
Bluebird(910) L20B 120hp@5600?rpm 122ft/lb@3600?rpm, 10.5mm lift, 248deg
I got some of this info from
HTTP://www.motorshow.or.jp/eng/data_library/car_history/index.html
I have a Bluebird 910 service manual that states 10.5mm lift but this
doesnt agree with the rpm points listed on this web site, 10.5mm would
get 5300 and 3300, 11.0mm lift would get 5600 and 3600. Damn manual
doesn't give RPM points or HP, just everything else!
Thanks,
Craig.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
