What gearbox cross member are you using...I bolted in a standard 1600 one
and it seamed to fit okay..Might be a tad heigh though
----- Original Message -----
From: jamesf <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, August 16, 2000 3:25 AM
Subject: Re: Z18 power
> You haven't missed anything cause I haven't really talked about it
> much... But you can bet I will have a lot more to say once I actually
> get my hands on my motor
>
> The Z18 is basically a L18 block, so you can use a L20b or Z20
> crank in the bottom end, So I am initially planning on doing a 2L
> and will do a 2.2 as soon as I get my hands on a Z22 crank :)
>
> In regards to the Z18Turbos, I have some coming soon, and will have
> a regular supply of them available... more info when the shipment
> gets closer to Melbourne... They are complete standard Z18 motors
> with computers, loom, dissy, gearbox, clutch, fuelpump, turbo and all
> manifolds etc... basically a complete package.
> We can also do Gearbox crossmembers and shortened Tailshafts
> if needed... for a compete conversion kit ready to go.
> I am also working on cheap Z20 rebuildable short motors.... for those
> who want more power :)
>
> But like I said more more info and pricing on them when they get
> closer to landing.
>
> Cya
> JamesF
>
>
> David Costello wrote:
>
> > I'm not talking about a standard Z18 I'm talking about the 2L version
JamesF
> > mentioned he was building
> >
> > Dave
> >
> > -----Original Message-----
> > From: cp <[EMAIL PROTECTED]>
> > To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> > Date: Tuesday, 15 August 2000 7:14
> > Subject: Re: Z18 power
> >
> > >standard z18...
> > >
> > >
> > >-----Original Message-----
> > >From: David Costello <[EMAIL PROTECTED]>
> > >To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> > >Date: Tuesday, 15 August 2000 19:04
> > >Subject: Re: Z18 power
> > >
> > >
> > >>sounds interesting I musta missed a thread somewhere about this engine
> > >>what bottom end does it use?
> > >>
> > >>
> > >>-----Original Message-----
> > >>From: jamesf <[EMAIL PROTECTED]>
> > >>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> > >>Date: Tuesday, 15 August 2000 4:01
> > >>Subject: Re: Z18 power
> > >>
> > >>
> > >>>Cool, so it was on a Dyno that we can believe the results from.
> > >>>
> > >>>That is good power then.... around 170hp at the wheels
> > >>>
> > >>>Thats more than a CA18 with stock turbo on 15PSI makes !!
> > >>>Correct me if I am wrong but Andrew Dennis's 1200 made
> > >>>150hp at rears with 15PSI (and intercooler?)
> > >>>
> > >>>I wonder what sort of increase in HP the Z18 would get with the
> > >>>addition of a roller bearing turbo, without changing anything else
> > >>>(though the standard injectors will probably run out of puff with
> > >>>all the extra air flow)
> > >>>
> > >>>Can't wait to get my Z18 happening with a 2L bottom end....
> > >>>
> > >>>cya
> > >>>JamesF
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>steven taylor wrote:
> > >>>
> > >>>> James,
> > >>>> I had it done at Croydon Autosports at Silverwater, good people
down
> > >>there!
> > >>>> Steve.
> > >>>>
> > >>>> jamesf wrote:
> > >>>>
> > >>>> > Hi Steve
> > >>>> >
> > >>>> > Who's dyno was that on?
> > >>>> >
> > >>>> > Cya
> > >>>> > JamesF
> > >>>> >
> > >>>> > steven taylor wrote:
> > >>>> >
> > >>>> > > Hi,
> > >>>> > > Just wondering what sortof horsepower all the Z18et owners out
> > there
> > >>>> > > have managed to get on the dyno?? I had mine done recently and
was
> > >>very
> > >>>> > > surprised/pleased with the results (126 kw@rear). This is stock
> > >>>> > > internally/intercooler/digi1 fuel only and about 14 psi boost,
> > >>>> > > anyone????????
> > >>>> > > Cheers
> > >>>> > > Steve.
> > >>>> > >
> > >>>> >
> > >>>> > --
> > >>>> >
> >
>>________________________________________________________________________
> > >>>> >
> > >>>> > James Fitness
> > >>>> > Director
> > >>>> > Data Scribe Australia Pty Ltd
> > >>>> > http://www.datascribe.com.au
> > >>>> > Computers and Supplies
> > >>>> >
> > >>>> > OZDAT Online
> > >>>> > http://www.datascribe.com.au/ozdatonline/index.htm
> > >>>> >
> > >>>>
> > >>>
> > >>>--
> >
>>>________________________________________________________________________
> > >>>
> > >>>James Fitness
> > >>>Director
> > >>>Data Scribe Australia Pty Ltd
> > >>>http://www.datascribe.com.au
> > >>>Computers and Supplies
> > >>>
> > >>>OZDAT Online
> > >>>http://www.datascribe.com.au/ozdatonline/index.htm
> > >>>
> > >>>
> > >>>
> > >>
> > >>
> > >
> > >
> >
>
> --
> ________________________________________________________________________
>
> James Fitness
> Director
> Data Scribe Australia Pty Ltd
> http://www.datascribe.com.au
> Computers and Supplies
>
> OZDAT Online
> http://www.datascribe.com.au/ozdatonline/index.htm
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
