Paul,
If you are talking about the metal tube it's for the EGR (Exhaust Gas
Recirculation) which is a pollution control system.
On the Weber - most webers have the Model and Type info stamped on the base
plate for downdraft type (eg 32/36 DGA-5A) and on the top cover for side
drafts (eg 45DCOE16). The numbers you have quoted look like they're off the
little alloy tag and they are build info i.e. where, when etc.
The best manual for a 200B? - factory for sure which are exy and may be NLA
so for generally available manuals I like Haynes but none of them are what
I'd call brilliant.
regards
Terry
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Paul W. J.
Stanley
Sent: Friday, 27 October 2000 3:39 PM
To: OZDAT Mailing list
Subject: Exhaust tube to manifold, weber
What's that 10mm tube from the exhaust to the intake? Cold start or
polution? What's the best manual for a 200B?
And I have a down draft weber that fits with some longer studs, but I dont
know what sort it is. It says:
WEBER
82 DA RB
A3 M 16
on the little plate...anyone know what that is?
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
