Daniel,
 
As far as I know, there are three models of 240K discs, 232mm, 253mm, 270mm.  The one which the Hilux four-spots fit to is the 253mm disc I believe, as this one was also used on some 200B struts (which is what some others have used for Hilux calipers)
 
The Hilux calipers are fairly heavy, something to consider before you buy some :)  I have 14" hotwires with good clearance for the 253mm disc and Sumitomo twin spots.  I don't know which Hilux to pull them off, you could try looking in the DBA catalogue for a similar size Toyota Hilux disc for a start I guess?
 
Regards,
 
Tom
 
PS Have a look at http://www.dba.com.au/catlog/result.asp?MakerID=40&DiscType=DISC&Maker=NISSAN%2FDATSUN if you want more info, and don't go thinking I'm a expert or nothin :)
 
----- Original Message -----
Sent: Thursday, November 02, 2000 11:31 AM
Subject: 240K struts and hilux calipers

I'm about to purchase the parts for the above conversion but I don't know which model 240K to get the struts from, does it matter?
The brakes will have to go under 13 inch superlites it that helps.  Also I want to put the 4 spot hilux calipers on while I'm at it, which model hilux should I get these off?  Are the pistons all the same or are there two small and two large(I've heard that you can get these), are they better than 4 large pistons?
 
Sorry for all the questions but I just want to know exactly what parts I need before I go and start pulling parts off cars at the wreckers.
 
Cheers and thanks in advance,
 
Daniel Kroehn

--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to