Yep, I guess so, just another few hundred dollars is something I probably
wont have at the moment, 'cause I still have to buy 200B struts, shockie
oil, new front and rear pads, new nuts for when I put the R31 brakes
on............ .................
Well you get the picture.
Daniel Kroehn
Supporting Datrats
WWW.Datrats.com.au
----- Original Message -----
From: Zac Campbell <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, November 14, 2000 6:18 PM
Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> Daniel, your twin weber L series motor would probably fail an EPA test
right
> now!
>
> zac
>
> ----- Original Message -----
> From: Daniel Kroehn <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, November 14, 2000 1:53 PM
> Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>
>
> > Hell yeah, but $30 and a bit of time off the road for a defect compared
to
> > fines of up to $10 000 for breach of EPA law is two different things in
my
> > book.
> >
> > Daniel Kroehn
> >
> > Supporting Datrats
> > WWW.Datrats.com.au
> >
> > ----- Original Message -----
> > From: Andrew Peters <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Tuesday, November 14, 2000 12:32 PM
> > Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> >
> >
> > > it is fuel only, not sure on the closed loop bit, doubt it, it doesnt
> > matter
> > > about the engine, just the chassis, mind you it doesnt really matter
at
> > all
> > > as im sure youve noticed most modified cars are illegal in some way or
> > > another.
> > > -----Original Message-----
> > > From: Daniel Kroehn <[EMAIL PROTECTED]>
> > > To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> > > Date: Tuesday, 14 November 2000 13:09
> > > Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> > >
> > >
> > > >Ok, one other question though, is the standard Z-18et computer fuel
> only
> > or
> > > >closed loop? Hey if its illegal to run an aftermarket on a post 76
> car,
> > > how
> > > >would it go since the Z-18et is actually an engine from a post 76
model
> > > >vehicle?
> > > >
> > > >Daniel Kroehn
> > > >Supporting Datrats
> > > >WWW.Datrats.com.au
> > > >
> > > >
> > > >----- Original Message -----
> > > >From: Andrew Peters <[EMAIL PROTECTED]>
> > > >To: <[EMAIL PROTECTED]>
> > > >Sent: Tuesday, November 14, 2000 11:04 AM
> > > >Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> > > >
> > > >
> > > >> as far as epa goes it is illegal to run an aftermarket computer on
> post
> > > 76
> > > >> cars, so your sweet, some others are interested in the computers so
> you
> > > >> better be quick
> > > >> andrew
> > > >> -----Original Message-----
> > > >> From: Daniel Kroehn <[EMAIL PROTECTED]>
> > > >> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> > > >> Date: Tuesday, 14 November 2000 11:37
> > > >> Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> > > >>
> > > >>
> > > >> >I'll have a think about it. I've read in a few books that
> aftermarket
> > > >> >computers can be against the EPA laws and big fines if caught, so
> I've
> > > >> gotta
> > > >> >do some investigating. I would have really liked a closed loop
> engine
> > > >> >management system as well. I'll get back to you on that one.
> > > >> >
> > > >> >Thanks
> > > >> >
> > > >> >Daniel Kroehn
> > > >> >
> > > >> >Supporting Datrats
> > > >> >WWW.Datrats.com.au
> > > >> >
> > > >> >----- Original Message -----
> > > >> >From: Andrew Peters <[EMAIL PROTECTED]>
> > > >> >To: <[EMAIL PROTECTED]>
> > > >> >Sent: Tuesday, November 14, 2000 9:34 AM
> > > >> >Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> > > >> >
> > > >> >
> > > >> >> yep theyre fuel only, screw driver tuners, not very good at all
> > > >compared
> > > >> >to
> > > >> >> todays standards, but work well none the less and are a great
> excuse
> > > >for
> > > >> >> throwing the afm
> > > >> >> andrew
> > > >> >> -----Original Message-----
> > > >> >> From: Daniel Kroehn <[EMAIL PROTECTED]>
> > > >> >> To: [EMAIL PROTECTED]
> <[EMAIL PROTECTED]>
> > > >> >> Date: Tuesday, 14 November 2000 10:04
> > > >> >> Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> > > >> >>
> > > >> >>
> > > >> >> >What's does a d4 and d5 actually do, fuel only?
> > > >> >> >----- Original Message -----
> > > >> >> >From: Andrew Peters <[EMAIL PROTECTED]>
> > > >> >> >To: <[EMAIL PROTECTED]>
> > > >> >> >Sent: Tuesday, November 14, 2000 12:11 AM
> > > >> >> >Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> > > >> >> >
> > > >> >> >
> > > >> >> >> i decided i can let my d4 go for $250 with loom or i can get
a
> d5
> > > >for
> > > >> >> $300
> > > >> >> >> with loom, if you can get say $50 back on stocker loom and
comp
> > > like
> > > >> >> >steve,
> > > >> >> >> its a decent upgrade, much cheaper than the $1k+ for new
comps
> > > >> >> >> andrew
> > > >> >> >> -----Original Message-----
> > > >> >> >> From: Daniel Kroehn <[EMAIL PROTECTED]>
> > > >> >> >> To: [EMAIL PROTECTED]
> > <[EMAIL PROTECTED]>
> > > >> >> >> Date: Monday, 13 November 2000 22:31
> > > >> >> >> Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> > > >> >> >>
> > > >> >> >>
> > > >> >> >> >Thanks steve. I think I'll pick one up from Errol as soon
as
> he
> > > >gets
> > > >> >> >some
> > > >> >> >> >in as he had a good price on his batch of Z-18ets and they
> came
> > > >with
> > > >> >> >> >everthing to "drop it in an drive away" . I will upgrade
the
> > > >> computer
> > > >> >> in
> > > >> >> >> >the future but at the moment I only have enough funds to buy
> the
> > > >> thing
> > > >> >> >and
> > > >> >> >> >drop it in the car. But hey, with a few simple breathing
mods
> > it
> > > >> >should
> > > >> >> >> >surely produce more power than my twin webered, over cammed
> > L20B.
> > > >> And
> > > >> >> >> >besides I still have to put my R31 and hilux/200B brakes on
> the
> > > >car,
> > > >> >so
> > > >> >> >> that
> > > >> >> >> >takes a little out of the budget.
> > > >> >> >> >
> > > >> >> >> >Thanks
> > > >> >> >> >
> > > >> >> >> >Daniel Kroehn
> > > >> >> >> >
> > > >> >> >> >Supporting Datrats
> > > >> >> >> >WWW.Datrats.com.au
> > > >> >> >> >
> > > >> >> >> >----- Original Message -----
> > > >> >> >> >From: Steve Taylor <[EMAIL PROTECTED]>
> > > >> >> >> >To: <[EMAIL PROTECTED]>
> > > >> >> >> >Sent: Tuesday, November 14, 2000 7:47 AM
> > > >> >> >> >Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> > > >> >> >> >
> > > >> >> >> >
> > > >> >> >> >> Daniel,
> > > >> >> >> >> I just sold my Z18et factory computer/loom/and airflow
meter
> > to
> > > >SSS
> > > >> >> for
> > > >> >> >> >> $50!!!!!!!!!! So unless you cant find a g/box to suit for
> > under
> > > >> $950
> > > >> >> >this
> > > >> >> >> >is
> > > >> >> >> >> certainly far to expensive. Apart from that the computer
is
> > the
> > > >> >first
> > > >> >> >> >thing
> > > >> >> >> >> that i got rid of and probably the most successful power
> > > >> enhancement
> > > >> >> >ive
> > > >> >> >> >done.
> > > >> >> >> >> Performance will be extremely limited if trying to use the
> > > >standard
> > > >> >> >comp
> > > >> >> >> >and
> > > >> >> >> >> basically it is just not worth the effort - they suck to
> wire
> > > >> aswell
> > > >> >> >(the
> > > >> >> >> >> microtech took about 1 hour to install).
> > > >> >> >> >> So if i were you id save the dollars, get a good
aftermarket
> > > >comp.
> > > >> >(im
> > > >> >> >> >just
> > > >> >> >> >> using a digi fuel only microtech) and youll be more than
> > pleased
> > > >> >with
> > > >> >> >how
> > > >> >> >> >> she'll go!
> > > >> >> >> >> Cheers
> > > >> >> >> >> Steve.
> > > >> >> >> >>
> > > >> >> >> >> Daniel Kroehn wrote:
> > > >> >> >> >>
> > > >> >> >> >> > Most of the jap import wreckers sell them for under
$1000
> > > >without
> > > >> >> >> >> > computer/harness and g/box. SSS in sydney has a
complete
> > > >package
> > > >> >> >> >(g/box,
> > > >> >> >> >> > engine, turbo, manifolds, comp, harness etc) only done
60
> > 000
> > > >> kays
> > > >> >> >and
> > > >> >> >> >the
> > > >> >> >> >> > guy drove it in Japan and reckons its a sweet motor.
> $2000
> > > >firm.
> > > >> >> >I'm
> > > >> >> >> >> > waiting to see if Errol can get some more in 'cause he
had
> a
> > > >good
> > > >> >> >price
> > > >> >> >> >on
> > > >> >> >> >> > the last batch he had.
> > > >> >> >> >> >
> > > >> >> >> >> > Hope it helps.
> > > >> >> >> >> >
> > > >> >> >> >> > Daniel Kroehn
> > > >> >> >> >> >
> > > >> >> >> >> > ----- Original Message -----
> > > >> >> >> >> > From: Wayne Jones <[EMAIL PROTECTED]>
> > > >> >> >> >> > To: <[EMAIL PROTECTED]>
> > > >> >> >> >> > Sent: Monday, November 13, 2000 4:56 PM
> > > >> >> >> >> > Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> > > >> >> >> >> >
> > > >> >> >> >> > > hi,
> > > >> >> >> >> > > if you decide not to get it could you let me know of
the
> > > >> seller.
> > > >> >> >> >> > >
> > > >> >> >> >> > > reg
> > > >> >> >> >> > > wayne jones
> > > >> >> >> >> > > http://drive.to/maximum_boost
> > > >> >> >> >> > >
> > > >> >> >> >> > >
> > > >> >> >> >> > > >From: "Daniel Kroehn" <[EMAIL PROTECTED]>
> > > >> >> >> >> > > >Reply-To: [EMAIL PROTECTED]
> > > >> >> >> >> > > >To: <[EMAIL PROTECTED]>
> > > >> >> >> >> > > >Subject: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> > > >> >> >> >> > > >Date: Mon, 13 Nov 2000 13:20:31 +1000
> > > >> >> >> >> > > >
> > > >> >> >> >> > > >List,
> > > >> >> >> >> > > >
> > > >> >> >> >> > > >I've found a Z-18et for a really good price without
the
> > box
> > > >or
> > > >> >> the
> > > >> >> >> >> > computer
> > > >> >> >> >> > > >and harness. Everything else is there. I already
have
> a
> > > >few
> > > >> L
> > > >> >> >> >series
> > > >> >> >> >> > > >boxes at home so I don't need a gearbox but I do need
a
> > > >> HARNESS
> > > >> >> >and
> > > >> >> >> >> > > >COMPUTER. If any of you guys who have put
aftermarket
> > > >> computer
> > > >> >> on
> > > >> >> >> >your
> > > >> >> >> >> > > >zeds have one lying around and are willing to sell
it,
> > > could
> > > >> >you
> > > >> >> >> >write
> > > >> >> >> >> > > >back.
> > > >> >> >> >> > > >
> > > >> >> >> >> > > >I JUST DON'T WANT TO LET THIS ONE SLIP THROUGH MY
> > FINGERS,
> > > >BUT
> > > >> >> >I'LL
> > > >> >> >> >HAVE
> > > >> >> >> >> > TO
> > > >> >> >> >> > > >IF I CAN'T GET A COMPUTER AND HARNESS
> > > >> >> >> >> > > >
> > > >> >> >> >> > > >Thanks
> > > >> >> >> >> > > >
> > > >> >> >> >> > > >
> > > >> >> >> >> > > >Daniel Kroehn
> > > >> >> >> >> > > >
> > > >> >> >> >> > >
> > > >> >> >> >> > >
> > > >> >> >>
> > > >> >>
> > > >>
> > >
> >_________________________________________________________________________
> > > >> >> >> >> > > Get Your Private, Free E-mail from MSN Hotmail at
> > > >> >> >> >http://www.hotmail.com.
> > > >> >> >> >> > >
> > > >> >> >> >> > > Share information about yourself, create your own
public
> > > >> profile
> > > >> >> at
> > > >> >> >> >> > > http://profiles.msn.com.
> > > >> >> >> >> > >
> > > >> >> >> >> > >
> > > >> >> >> >> >
> > > >> >> >> >>
> > > >> >> >> >>
> > > >> >> >> >
> > > >> >> >> >
> > > >> >> >>
> > > >> >> >>
> > > >> >> >
> > > >> >> >
> > > >> >>
> > > >> >>
> > > >> >
> > > >> >
> > > >>
> > > >>
> > > >
> > > >
> > >
> > >
> >
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
