Iggy,
Seeing as you are using stock drums presumably with stock 13/16 bore slaves
I'd use a 3/4" Nabco, Tokico or Sankyo or if you want very firm feel with
that setup a 13/16" Sunny is good (usually Nabco on these). The 3/4"
Japanese cylinders will give around 65/35 bias or the 13/16" Sunny Nabco
will give around 60/40.
regards,
Terry
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Monday, 15 January 2001 2:24
To: [EMAIL PROTECTED]
Subject: More brake qs...
Hey all,
I posted this a while ago but it still remains unanswered...
Sumitomo twin spots...
Stock drums..
180b prop valve..
180b booster...
Can anyone recommend a m/c size???
The only requirement is that it has detachable resevoirs..
( Needed for the FJ conversion)
I was also at the nats and saw all the Dattos mentioned except for
GOD - 20L . Damn it!!!
Thanks again!!!
Iggy
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
