hey
anythings possible... a little persuasion is sometimes required.
a friend of mine recently put 300zx front discs and calipers onto his 180SX.
he needed spacers made up between the wheel and the hub.
the discs went on without a problem, the calipers bolted up the same, which
may be different for your car. different brake line fittings.
because the 4-pot calipers are pretty wide, you will need to get spacers to
make sure they aren't going to stop the wheel from going on.
calipers are expensive and hard to find. DBA909X (cross-drilled vented DBA
gold rotors) are available from any reputable brake part companies. normally
have to be ordered. sometimes you can get away with having them drilled in a
4-stud pattern too.
r6
>From: "Guy Coble" <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: <[EMAIL PROTECTED]>
>Subject: 300zx brakes
>Date: Sun, 25 Feb 2001 17:47:12 +1100
>
>Howdy all,
>Just wondering if anyone would know where i could find the specs on the
>300zx/r32 4 spot callipers and discs. I have 280zx struts with twinspots
>and vented disc just wondering if there would be anychance of the 4 spots
>and discs fitting up, I don't like my chances but i thought i would ask.
>
>Regs
>Guy
>
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
