Mark,
This might not help a lot since nobody really hots them up except on
Z18ET's- but the cylinder heads used on ALL the other NAPS/Z motors (eg Z20,
Z22, Z24) are pretty much exactly the same as the Z18ET one. They achieved
different compression ratios on the different motors but altering the pin
height and dish size of the pistons, but the heads remained pretty much the
same (except for small variations eg some are single plug some are twin
plug, size of valves etc)
Hopefully this helps since we got carby Z20, Z22 and Z24's in things like
Navaras and Urvans, somebody might know what you're on about! Also perhaps
try Repco they're usually pretty good.
Cheers,
- Tom
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of mark krawczuk
Sent: Sunday, 15 April 2001 8:30 PM
To: [EMAIL PROTECTED]
Subject: valve stem seals
hi, does any one know of any hi-performabce valve stem seals for the nissan
z18 ? teflon etc.....
i asked the four,six and eight shop in adelaide but they were really
hopless, we stock anything they said.......... when i asked them they said
no, sorry, we only have american ...... what the hell does that mean?
mark
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
