I am also making a manifold for an L20 efi turbo setup.I'm using mandrel bent
ally runners with a large custom plenum.I have 8 036 injectors that I'll probably
use.I'll probably use some type of idle control as my cam is a little wild.I have
a dizzy that was used on a race car that has a hall effect setup using a camira
chopper in a bosch dizzy.It dosen't have a dizzy cap and requires 4 coils and
igniters be used.I've seen a similar setup on a holden 6 that works well(runs
11's).
Andrew Smith
David Thompson wrote:
> Ryan,
> I am in the process of building an l20 injection manifold, using a cut down
> 280zx manifold (removal of the middle two cylinders), and ford throttle body.
> The diameter of the runners on the 280zx manifold is bigger than the L18 of
> skyline L24 manifolds. I am also porting the rinners for extra flow....
>
> [EMAIL PROTECTED] wrote:
>
> Thanks,
> I'm going to build my own efi manifold for my L20 efi intercooled turbo,
> interesting he used a toyota ignition setup, I am open to suggestions on
> computer controlled ignition for an L series.
> Thanks for all the replys, as always the list is wealth of info.
> Ryan
>
> ======================================================================
> This email message has been swept by MIMEsweeper.
>
> ____________________________________________________________________
> Get free email and a permanent address at http://www.netaddress.com/?N=1
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
