disk diameter is 253mm (about 10inches) caliper mount spacing is 89 mm stub axle diameter: I didn't know exactly which diameter to measure, so I measured them all. The thickest part (I assume this is the one needed is 32mm, the thinner part after the taper is 19mm, the threaded part is 18mm and the thin bit at the end where the split pin goes through is 15.5mm. Hope these help! Thomas.
>From: [EMAIL PROTECTED] >Reply-To: [EMAIL PROTECTED] >To: [EMAIL PROTECTED] >Subject: Re: strut identification needed >Date: Fri, 19 Oct 2001 04:13:17 GMT > >looks like a 180b monstrosity only larger? >Last time you posted we asked for some measurements that would be able to >help >us identify the strut but you did not reply. >Measure the caliper mount spacing. >Measure the stub axle diameter (it is under the disc/hub). > > > > > Hi list, I posted a querie on the list a few weeks ago about how to work >out > > what strut are on my 1600. It isn't obvious to me what point at the >bottom > > of the strut is the "stub axle". Could someone please clear this up for >me > > so I can measure them properly. In the mean time I've taken a photo of >the > > brakes on the struts and uploaded it to the members area :unidentified > > struts. The previous owner had ground away some of the metal on the >caliper, > > as indicated by the red arrows in the picture > > http://www.ozdat.com/membersozdat/uploads/ , to allow the fittment of a >13 > > inch datto rim. Does anyone what struts these brakes are off? Thanks, > > Thomas. > > > > _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
