Robyn, If they are going to use spacers between the floor and the x-member (reversed with Stanza box) then the bolts need to be ~19mm longer for the dog box (also the bolts must be high tensile for ACT Rego if they notice the modification.) There are two dog boxes, the Stanza type is shorter than the 180B type and the x-member will not bolt up to the stock holes with the longer box. The rear mount to use on either box is not the 1600 type but from the Stanza, 240K, C210 etc. but the bolts are not anything special here. It's about 1/2 the thickness of the 1600 mount and it eliminates a lot of hassles.
regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Robyn McCaughan Sent: Wednesday, 14 November 2001 3:45 PM To: [EMAIL PROTECTED] Subject: Gearbox Mount - Kinda Urgent My 1600 is currently at the mechanics... :( Anyway, they have a problem with the gearbox mount. Apparently the bolts are not long enough. Engine is an L18, gearbox is a 5 speed (dogleg? - where reverse is top left and first is below that). Any suggestions for a suitable replacement mount? Or other way out? Sorry if this doesn't make complete sense but i have no idea myself, just going on the crap they tell me. BTW Bruce they think the visors are no good :( _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
