I made my windage tray from a keep left sign that I found in an industrial bin on a worksite. Just used paint stripper to take off the printing and cut it out.
Daniel Kroehn ----- Original Message ----- From: "mick ralph" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, January 25, 2002 2:36 PM Subject: Heat shields for Webers > I intend to fashion up a heat shield before the racing next weekend but i > have some questions.... > Can u mount one end of the shield to the airfilter assy (K&N)? Either under > the filter assy or on top I'm concerned about the vibration that it may > cause to the carbs if mounted too tight > Does the heat shield need to be rubber mounted too? I'm thinking some sort > of 'L' brackets off the centre exh studs. > Should the shield extend from as close to the head as possible and finish at > or before the aircleaner assy? > I'm going to make the shield part out of lightweight sheet alloy (a stop > sign might be fun) but should the brackets onto the exhaust studs be alloy > or steel? > I intend to incorporate a side flap type arrangement at the front to try and > shield the distributor. Any problems with this? Maybe airflow? > Sorry for all the questions but i never thought something so seemingly > simple could prove so hard to work out. > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
