I have R31 skyline brakes on the front, using a 180B brake booster and 7/8 dual circuit master cylinder, these pull up well but the old single circuit master cylinder pulled the car up HEAPS better. Is the sunny unit the way to go??
Cheers Justin > -----Original Message----- > From: Andrew Greenbury [SMTP:[EMAIL PROTECTED]] > Sent: Monday, February 18, 2002 10:08 AM > To: [EMAIL PROTECTED] > Subject: RE: lOOKING FOR 240 k FRONT END > > Hi Terry, > > Ahh this sounds familiar to me, as I have 240K with twin spots and > rear drums, with 180b i think booster and 7/8 cylinder, and I have > been quietly wondering why everyone goes on about how good > 240K brakes are :) > > I think I will try and score a sunny master cylinder... > > Thanks again > Andrew > > > Leighton, > > > > I and most others with 200b or 240K Fronts and drums or R31 on the > > rear have had nothing but grief with the combination of a 7/8" > > cylinder and Kiki Bendix 180B/210/310 booster. You either throw the > > booster or change the cylinder for a 13/16" Sunny unit. The 7/8" > > has to much travel for that combo. It does depend on what callipers > > you use, Sumo 2 spots are better and 4 spot cruiser callipers are > > good but the single spots have a problem. > > > > regards > > Terry > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of Leighton > > Sent: Saturday, 16 February 2002 8:02 PM > > To: [EMAIL PROTECTED] > > Subject: Re: lOOKING FOR 240 k FRONT END > > > > > > what abouit with a 240k front end with a 7/8" master cylinder and > 120y/180b > > booster > > > > > > Leighton > > ----- Original Message ----- > > From: "Terry Rudd" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Saturday, February 16, 2002 1:01 PM > > Subject: RE: lOOKING FOR 240 k FRONT END > > > > > > > Leighton, > > > > > > Pass on the 240K legs, there was a 240K (blue) at Dunkers a couple of > > weeks > > > back that was complete but the way stuff gets shifted there it's > highly > > > unlikely to be there - it had a full set of QI lights too. > > > > > > On R31 rears, some combos work well with just the inbuilt > proportioning in > > > the master cyl. 200B/R31 with 13/16 Sunny cylinder is one, although > you > > need > > > fairly similar range pads for it to work well. > > > > > > regards > > > Terry > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED]]On Behalf Of Leighton > > > Sent: Thursday, 14 February 2002 5:57 PM > > > To: [EMAIL PROTECTED] > > > Subject: lOOKING FOR 240 k FRONT END > > > > > > > > > I know its a long shot but if any one has got a 240K front end they > wanna > > > get rid off could you please let me know???? i am looking for one > > > > > > > > > alos im going to put the R31 skyline disc brakes on the rear end of my > > > 1600 - to get them to work properly do i need a proportion valve or > will > > > they work without one??? > > > > > > > > > thanx > > > > > > Leighton > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
