Tim,
Not that i know your set up or anything but is it really worth the hassle of getting plates made up and so on? Just shell out a little extra and get the vented disc. If its done properly the plates will be ok, but still why bother on standard disc? just my thoughts chris Tim Heibloem writes: > Hey Guys, > > I have a set of later model Hilux 4 Spot Calipers which i have been > using...the problem im having is when i bleed the braking system the front > calipers are not pushing the pistons far enough out and the system requires > a couple of pumps to get a firm pedal... > > 1. my theory is that the calipers are designed for a thicker disk (ie > vented) and cannot perform well on the current skyline cross-drilled rotor.. > > 2. My Master Cylinder is undersized and is not moving enough fluid to > activate the calipers properly > > Either way i would like a set of vented rotors, used or new. > > In the meantime im planning on getting some 4-6 mm Spacers made and putting > them behind the pads to move them closer to the the rotors to get a good > pedal...what are your thoughts on this? > > > sorry about the Essay > > > tim > > > PS the 2 door is almost done! it will be on the road in a short while! > > > > _________________________________________________________________ > MSN Photos is the easiest way to share and print your photos: > http://photos.msn.com/support/worldwide.aspx > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
