G'day All, Once again I come to you for help (sorry, been reading Lord of the Rings). I have finally for my L24 back together and it runs, but heres the story. Run it the other day and though I didn't check it explicity it seemed to be running perfectly. Today I put some more oil in the SU's and then fired it up again and 1,2,3 are no longer running, I fear that I may have put a little too much oil in the SU for them. How sensitive is this? Also when its running if i undo the oil filler on the carby and pull it out a way then put it back in it doesn't do anything, but if i do the same to the carby for 4,5,6 then as you push the oil thingo back in if you do it fast it kills the revs etc etc. Also it is blowing smoke, not unusual I know. So heres my questions:
-have i put too much oil in the SU? -if i have, is it possible this oil is what is being burnt? As opposed to the rings being worn etc etc. -what other reason is there for the SU to not work (it is getting fuel)? -and how do i go about fixing it? Thanks, Dave --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
