Yeah I've used Rainex alot which is Phosphoric acid, although you do have to paint over it afterwards. A good quality Cold Galvanising (zinc rich) paint for unseen areas or where I've seam-welded. Use a good quality bog on bare metal for visible areas.
Rob P ----- Original Message ----- From: "Chris Howard" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, August 28, 2003 8:49 PM Subject: RE: rust conversion > Get some phosphoric acid, commonly sold as rust converter. It works > well, gets the most of the rust off and turns the rest into a black > stuff which you can paint over. Apply several times for best results :) > > Cheers, > > Chris > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of > > andrew peters > > Sent: Thursday, 28 August 2003 7:38 PM > > To: [EMAIL PROTECTED] > > Subject: rust conversion > > > > > > hi all, im sure its been covered 100 times before but has > > anyone had any success with rust conversion. ive tried a few > > thing before but cant really remember if they worked or not. > > cheers > > andrew > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
