I ran with the 50/50 mix - it didnt really seem to make much difference, though this box is pretty had it. Also there were two grades of ATF, Type F and some other type (cant remember). I grabbed the type F, basically as a bit of a coin toss. Was this the right thing to do?
On Mon, 2003-09-22 at 20:43, Terry Rudd wrote: > Bob, > > A few things work pretty well in worn Datto boxes, 50/50 ATF & Hypo90W or > get hold of some Redline Gear Oil 75W/90 (good stuff this), and even Castrol > VMX80 seems to be pretty good, much cheaper and much easier to find than > Redline. > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Bob > Sent: Sunday, 25 May 2003 9:39 AM > To: [EMAIL PROTECTED] > Subject: Gearbox oil > > > Hi All, > > What oil should I run in a standard but tired gearbox behind an equally > standard and tired l26? The syncros in this box are a little dicky as well. > > Regards, > Bob > > > > > > -- Bob <[EMAIL PROTECTED]> --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
