If it is anything like the TD, the old one just comes out and the new
one should go in the same way, fairly apparent once you open up the door
panel. A few bolts to undo, then some gyrations to get it out of the
door, gyrations to get it back in, bolt it back up. It helps to undo
the glass from the reg, then pull it up and put some little wood wedges
in it at the bottom of the window frame to hold it up so you don't have
to fight it while you are removing/replacing the reg.
You might also be able to fix the old one if it is just bent or
something has sheared -- I fixed one of mine where a big rivet on the
raising arm gear end had sheared off, and "realigned" one that was bent
with a couple of 2x4s and some stomping -- a highly-sophisticated
procedure not well-documented in the manual.
I will have a cerveza for you in a few minutes.
--R
Don & Teresa Merriman wrote:
Hola amigos
I need to change the drivers side window regulator on my 1982 380SEL,
only 487,000 miles, and I am looking for tips, instructions, diagrams,
and any help available. New part in hand from Rusty, just guidance and
cerveza.
Gracias in advance.
--
Don & Teresa Merriman
Market Place Mexico
Vacation Rentals
Property Administration
www.marketplacemexico.com <http://www.marketplacemexico.com>
------------------------------------------------------------------------
_______________________________________
For used parts email [EMAIL PROTECTED]
For new parts see www.buymbparts.com
For repairs see www.oldworldauto.com
To Unsubscribe or change delivery options go to:
http://striplin.net/mailman/listinfo/mercedes_striplin.net
