Right Chuck, except I think it's only one screw on the 126. On 10/1/05, Chuck Landenberger <[EMAIL PROTECTED]> wrote: > Peter, > > Not completely sure that door handles on a 126 are the same as my > 116. But, take a look at the side of the door where locking > mechanism is and see if there is an oval, black plastic cover (1"x2") > and carefully remove. Inside you will see two phillips screws. > Tighten them. Should do it. If you wish to ever remove a handle, > just remove screws, slide handle forward and it will pull out of the > door. > > HTH,
-- OK Don, KD5NRO Norman, OK '87 300SDL, '81 240D, '78 450SLC The FSM created the Diesel Benz http://www.venganza.org/