It's on the transmission. I HOPE it's bits of twisted metal inside the torque converter. If so, is there a trick to getting it off without causing further damage to the transmission or just give it the old pull and wiggle? Does gentle even prying ever come into play?
Steve -----Original Message----- From: mercedes-boun...@okiebenz.com [mailto:mercedes-boun...@okiebenz.com] On Behalf Of Mitch Haley Sent: Sunday, March 21, 2010 6:55 PM To: Mercedes Discussion List Subject: Re: [MBZ] 240D Transmission issue OK Don wrote: > I take it then that you didn't remove the TC with the tranny? If he did, he can reach into the bellhousing, grab the TQ, and pull. Should come out pretty easy, unless it's got twisted metal bits on the part of the TQ that slides into the front of the tranny. Mitch. _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com