Max: Yeah, that's why my indy avoided heat altogether. Cut the bar with a cutoff wheel (Very hard, took forever), then installed his version of the collar with SET SCREWS that fit into flats ground in the torsion bar and JB Weld.
It sounds like bubble gum and baling wire, but was very neatly executed. I've given it a severe beating since with very hard driving on frost=heaved Maine backroads, including trail-braking and sliding through corners that turned out to be a bit (OK, much!) sharper than I thought, and no problems. In fact, if I'd remembered at the time I'd had the repair done, I'd not have been driving so hard, but the repair has held up just fine. I don't know whether a weld that affected the temper would be as durable. Dan ------- Original Message ------- >From : mercedes-requ...@okiebenz.com[mailto:mercedes-requ...@okiebenz.com] Sent : 10/4/2010 10:34:05 AM To : mercedes@okiebenz.com Cc : Subject : RE: Mercedes Digest, Vol 59, Issue 12 Send Mercedes mailing list submissions to mercedes@okiebenz.com To subscribe or unsubscribe via the World Wide Web, visit http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com or, via email, send a message with subject or body 'help' to mercedes-requ...@okiebenz.com You can reach the person managing the list at mercedes-ow...@okiebenz.com When replying, please edit your Subject line so it is more specific than "Re: Contents of Mercedes digest..." Today's Topics: 1. Re: 617 Manual Flywheel Measurements (Walt Zarnoch) 2. Re: Mercedes Digest, Vol 59, Issue 9 (Dillon, Meade M CIV SPAWARSYSCEN-ATLANTIC, 53310) 3. Re: 617 Manual Flywheel Measurements (Dillon, Meade M CIV SPAWARSYSCEN-ATLANTIC, 53310) 4. Re: 617 Manual Flywheel Measurements (Walt Zarnoch) 5. OT I go on a B17 (Kaleb C. Striplin) 6. Re: 617 Manual Flywheel Measurements (Curt Raymond) 7. Re: OT I go on a B17 (Allan Streib) 8. Re: Another part failure on my "cheap" '95 E300 (R A Bennell) 9. Re: 617 Manual Flywheel Measurements (Rolf) 10. Re: Another part failure on my "cheap" '95 E300 (Mitch Haley) ---------------------------------------------------------------------- Message: 1 Date: Mon, 4 Oct 2010 08:06:57 -0400 It's SuperTurboDiesel.com Happens to be one of the the best places for Benz diesel mayhem that I have found. Walt, who's day started out on the "Where's the darn coffee cup, I need a triple espresso..." note, and hopefully ends on the "Good news everyone! I've solved every problem!" note On Mon, Oct 4, 2010 at 7:43 AM, Dillon, Meade M CIV SPAWARSYSCEN-ATLANTIC, 53310 <meade.m.dil...@navy.mil> wrote: > Yabut what is "STD"? > > -Max > > -----Original Message----- > From: mercedes-boun...@okiebenz.com [ mailto:mercedes-boun...@okiebenz.com ] > On Behalf Of Walt Zarnoch > Sent: Monday, October 04, 2010 3:52 AM > To: Mercedes Discussion List > Subject: Re: [MBZ] 617 Manual Flywheel Measurements > > Haha, about 5 minutes after I made that post, I realized Winmutt = Rolf, and > about 20 minutes after that I realized you were user #1, and therefore the > admin. > > Life, she is a fun one to play... > > Walt > > On Fri, Oct 1, 2010 at 9:54 PM, Walt Zarnoch <zarnoch...@gmail.com> wrote: >> Something like an infection that you get when you know Rolf and have a >> Mercedes product... :D >> >> Still reading... >> >> Walt >> >> On Fri, Oct 1, 2010 at 9:46 PM, Dillon, Meade M CIV >> SPAWARSYSCEN-ATLANTIC, 53310 <meade.m.dil...@navy.mil> wrote: >>> What is STD? ?Oh - sorry - I wasn't supposed to read the secret message >>> part, was I!? >>> >>> -Max >>> >>> ________________________________ >>> >>> From: mercedes-boun...@okiebenz.com on behalf of Walt Zarnoch >>> Sent: Fri 10/1/2010 9:15 PM >>> To: Mercedes Discussion List >>> Subject: Re: [MBZ] 617 Manual Flywheel Measurements >>> >>> >>> >>> I've looked into butterfly, but it doesn't fully fit with what I need to do. >>> >>> I'd much prefer a laptop with Inventor that I can fire up wherever, >>> and not need to worry about getting cellular/net reception or dealing >>> with lag. >>> >>> Walt >>> >>> SECRET MESSAGE TO Rolf! >>> >>> Plopped my request for measurements in a new thread on STD, and also >>> found your thread on the flywheel swap. Mmm... >>> >>> On Thu, Sep 30, 2010 at 8:18 PM, Mountain Man <maontin....@gmail.com> wrote: >>>> Walt wrote: >>>>> Inventor 2K11 Pro Educational >>>>> >>>>> Does all I need and more. >>>> >>>> I don't play with parts - but I would do that if I had parts to make. >>>> My son got quite proficient with Inventor 4 years ago working in >>>> Columbus, OH. >>>> Also, try butterfly.autodesk.com for cloud cad - I signed up and >>>> find it a bit slow, but fascinating. ?CAD on the cloud is where they >>>> want us all to be someday, charging by the hour or minute of time >>>> used, or something like that. >>>> mao >>>> >>>> _______________________________________ >>>> http://www.okiebenz.com < http://www.okiebenz.com/> For new and used >>>> parts go to www.okiebenz.com To search list archives >>>> http://www.okiebenz.com/archive/ >>>> >>>> To Unsubscribe or change delivery options go to: >>>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>>> >>> >>> _______________________________________ >>> http://www.okiebenz.com < http://www.okiebenz.com/> For new and used >>> parts go to www.okiebenz.com To search list archives >>> http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >>> >>> >>> _______________________________________ >>> http://www.okiebenz.com >>> For new and used parts go to www.okiebenz.com To search list archives >>> http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >> > > _______________________________________ > http://www.okiebenz.com > For new and used parts go to www.okiebenz.com To search list archives > http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > _______________________________________ > http://www.okiebenz.com > For new and used parts go to www.okiebenz.com > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ------------------------------ Message: 2 Date: Mon, 4 Oct 2010 08:05:52 -0400 Very nice pictures and explanation in the second link, looks like they sell it for about $200 per side. The welding bit is rather glossed over - one needs to make sure the temper and hardness of the torsion bar is not changed during the process. -Max -----Original Message----- On Oct 3, 2010, at 2:51 PM, mercedes-requ...@okiebenz.com wrote: > Do you remember the price? Website? > > -Max I got it done from my indy (also Loren's indy), Doug Havlik at Imported Autos on Reliable Street in Ames, IA. He had the collar milled locally, or so he said. SO, I don't know about the internet source. I'd bet doug would sell you one if you asked. He charged me $600 to make the piece, cut the bar, and install it and align the car, so just the part would be lots cheaper. Did find these links, however: http://www.peachparts.com/shopforum/showthread.php?t=144023&highlight=sw ay http://www.activeboard.com/forum.spark?forumID=91042&p=3&topicID=1714049 7 Good luck! Dan _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ------------------------------ Message: 3 Date: Mon, 4 Oct 2010 08:27:58 -0400 Thanks, sounds like a place that doesn't take itself too seriously. -Max -----Original Message----- It's SuperTurboDiesel.com Happens to be one of the the best places for Benz diesel mayhem that I have found. Walt, who's day started out on the "Where's the darn coffee cup, I need a triple espresso..." note, and hopefully ends on the "Good news everyone! I've solved every problem!" note On Mon, Oct 4, 2010 at 7:43 AM, Dillon, Meade M CIV SPAWARSYSCEN-ATLANTIC, 53310 <meade.m.dil...@navy.mil> wrote: > Yabut what is "STD"? > > -Max > > -----Original Message----- > From: mercedes-boun...@okiebenz.com > [ mailto:mercedes-boun...@okiebenz.com ] On Behalf Of Walt Zarnoch > Sent: Monday, October 04, 2010 3:52 AM > To: Mercedes Discussion List > Subject: Re: [MBZ] 617 Manual Flywheel Measurements > > Haha, about 5 minutes after I made that post, I realized Winmutt = Rolf, and > about 20 minutes after that I realized you were user #1, and therefore the > admin. > > Life, she is a fun one to play... > > Walt > > On Fri, Oct 1, 2010 at 9:54 PM, Walt Zarnoch <zarnoch...@gmail.com> wrote: >> Something like an infection that you get when you know Rolf and have >> a Mercedes product... :D >> >> Still reading... >> >> Walt >> >> On Fri, Oct 1, 2010 at 9:46 PM, Dillon, Meade M CIV >> SPAWARSYSCEN-ATLANTIC, 53310 <meade.m.dil...@navy.mil> wrote: >>> What is STD? ?Oh - sorry - I wasn't supposed to read the secret message >>> part, was I!? >>> >>> -Max >>> >>> ________________________________ >>> >>> From: mercedes-boun...@okiebenz.com on behalf of Walt Zarnoch >>> Sent: Fri 10/1/2010 9:15 PM >>> To: Mercedes Discussion List >>> Subject: Re: [MBZ] 617 Manual Flywheel Measurements >>> >>> >>> >>> I've looked into butterfly, but it doesn't fully fit with what I need to do. >>> >>> I'd much prefer a laptop with Inventor that I can fire up wherever, >>> and not need to worry about getting cellular/net reception or >>> dealing with lag. >>> >>> Walt >>> >>> SECRET MESSAGE TO Rolf! >>> >>> Plopped my request for measurements in a new thread on STD, and also >>> found your thread on the flywheel swap. Mmm... >>> >>> On Thu, Sep 30, 2010 at 8:18 PM, Mountain Man <maontin....@gmail.com> wrote: >>>> Walt wrote: >>>>> Inventor 2K11 Pro Educational >>>>> >>>>> Does all I need and more. >>>> >>>> I don't play with parts - but I would do that if I had parts to make. >>>> My son got quite proficient with Inventor 4 years ago working in >>>> Columbus, OH. >>>> Also, try butterfly.autodesk.com for cloud cad - I signed up and >>>> find it a bit slow, but fascinating. ?CAD on the cloud is where >>>> they want us all to be someday, charging by the hour or minute of >>>> time used, or something like that. >>>> mao >>>> >>>> _______________________________________ >>>> http://www.okiebenz.com < http://www.okiebenz.com/> For new and used >>>> parts go to www.okiebenz.com To search list archives >>>> http://www.okiebenz.com/archive/ >>>> >>>> To Unsubscribe or change delivery options go to: >>>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>>> >>> >>> _______________________________________ >>> http://www.okiebenz.com < http://www.okiebenz.com/> For new and used >>> parts go to www.okiebenz.com To search list archives >>> http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >>> >>> >>> _______________________________________ >>> http://www.okiebenz.com >>> For new and used parts go to www.okiebenz.com To search list >>> archives http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >> > > _______________________________________ > http://www.okiebenz.com > For new and used parts go to www.okiebenz.com To search list archives > http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > _______________________________________ > http://www.okiebenz.com > For new and used parts go to www.okiebenz.com To search list archives > http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ------------------------------ Message: 4 Date: Mon, 4 Oct 2010 08:55:31 -0400 >From what I can tell, the only thing that gets a flame war started is a SVO conversion :P On Mon, Oct 4, 2010 at 8:27 AM, Dillon, Meade M CIV SPAWARSYSCEN-ATLANTIC, 53310 <meade.m.dil...@navy.mil> wrote: > Thanks, sounds like a place that doesn't take itself too seriously. > > -Max > > -----Original Message----- > From: mercedes-boun...@okiebenz.com [ mailto:mercedes-boun...@okiebenz.com ] > On Behalf Of Walt Zarnoch > Sent: Monday, October 04, 2010 8:07 AM > To: Mercedes Discussion List > Subject: Re: [MBZ] 617 Manual Flywheel Measurements > > It's SuperTurboDiesel.com > > Happens to be one of the the best places for Benz diesel mayhem that I have > found. > > Walt, who's day started out on the "Where's the darn coffee cup, I need a > triple espresso..." note, and hopefully ends on the "Good news everyone! I've > solved every problem!" note > > On Mon, Oct 4, 2010 at 7:43 AM, Dillon, Meade M CIV SPAWARSYSCEN-ATLANTIC, > 53310 <meade.m.dil...@navy.mil> wrote: >> Yabut what is "STD"? >> >> -Max >> >> -----Original Message----- >> From: mercedes-boun...@okiebenz.com >> [ mailto:mercedes-boun...@okiebenz.com ] On Behalf Of Walt Zarnoch >> Sent: Monday, October 04, 2010 3:52 AM >> To: Mercedes Discussion List >> Subject: Re: [MBZ] 617 Manual Flywheel Measurements >> >> Haha, about 5 minutes after I made that post, I realized Winmutt = Rolf, and >> about 20 minutes after that I realized you were user #1, and therefore the >> admin. >> >> Life, she is a fun one to play... >> >> Walt >> >> On Fri, Oct 1, 2010 at 9:54 PM, Walt Zarnoch <zarnoch...@gmail.com> wrote: >>> Something like an infection that you get when you know Rolf and have >>> a Mercedes product... :D >>> >>> Still reading... >>> >>> Walt >>> >>> On Fri, Oct 1, 2010 at 9:46 PM, Dillon, Meade M CIV >>> SPAWARSYSCEN-ATLANTIC, 53310 <meade.m.dil...@navy.mil> wrote: >>>> What is STD? ?Oh - sorry - I wasn't supposed to read the secret message >>>> part, was I!? >>>> >>>> -Max >>>> >>>> ________________________________ >>>> >>>> From: mercedes-boun...@okiebenz.com on behalf of Walt Zarnoch >>>> Sent: Fri 10/1/2010 9:15 PM >>>> To: Mercedes Discussion List >>>> Subject: Re: [MBZ] 617 Manual Flywheel Measurements >>>> >>>> >>>> >>>> I've looked into butterfly, but it doesn't fully fit with what I need to >>>> do. >>>> >>>> I'd much prefer a laptop with Inventor that I can fire up wherever, >>>> and not need to worry about getting cellular/net reception or >>>> dealing with lag. >>>> >>>> Walt >>>> >>>> SECRET MESSAGE TO Rolf! >>>> >>>> Plopped my request for measurements in a new thread on STD, and also >>>> found your thread on the flywheel swap. Mmm... >>>> >>>> On Thu, Sep 30, 2010 at 8:18 PM, Mountain Man <maontin....@gmail.com> >>>> wrote: >>>>> Walt wrote: >>>>>> Inventor 2K11 Pro Educational >>>>>> >>>>>> Does all I need and more. >>>>> >>>>> I don't play with parts - but I would do that if I had parts to make. >>>>> My son got quite proficient with Inventor 4 years ago working in >>>>> Columbus, OH. >>>>> Also, try butterfly.autodesk.com for cloud cad - I signed up and >>>>> find it a bit slow, but fascinating. ?CAD on the cloud is where >>>>> they want us all to be someday, charging by the hour or minute of >>>>> time used, or something like that. >>>>> mao >>>>> >>>>> _______________________________________ >>>>> http://www.okiebenz.com < http://www.okiebenz.com/> For new and used >>>>> parts go to www.okiebenz.com To search list archives >>>>> http://www.okiebenz.com/archive/ >>>>> >>>>> To Unsubscribe or change delivery options go to: >>>>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>>>> >>>> >>>> _______________________________________ >>>> http://www.okiebenz.com < http://www.okiebenz.com/> For new and used >>>> parts go to www.okiebenz.com To search list archives >>>> http://www.okiebenz.com/archive/ >>>> >>>> To Unsubscribe or change delivery options go to: >>>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>>> >>>> >>>> >>>> _______________________________________ >>>> http://www.okiebenz.com >>>> For new and used parts go to www.okiebenz.com To search list >>>> archives http://www.okiebenz.com/archive/ >>>> >>>> To Unsubscribe or change delivery options go to: >>>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>>> >>> >> >> _______________________________________ >> http://www.okiebenz.com >> For new and used parts go to www.okiebenz.com To search list archives >> http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> >> _______________________________________ >> http://www.okiebenz.com >> For new and used parts go to www.okiebenz.com To search list archives >> http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > > _______________________________________ > http://www.okiebenz.com > For new and used parts go to www.okiebenz.com To search list archives > http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > _______________________________________ > http://www.okiebenz.com > For new and used parts go to www.okiebenz.com > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ------------------------------ Message: 5 Date: Mon, 04 Oct 2010 08:40:51 -0500 There was a fully restored WW2 B17 in town over the weekend. You could buy a flight on it for $400 if you wanted, but the tours were free. It was pretty neat to see. I was amazed at the amount of oil that those big engines appear to leak. About like an old 617 or something. -- Kaleb C. Striplin/Claremore, OK 95 E300, 94 S500, 92 500SEL, 92 300SD, 92 300E 4Matic, 91 350SDL, 91 300D, 89 560SEL, 87 300SDL x2, 85 380SE 5.0 Euro, 85 190D, 84 190D, 84 300D euro manny, 76 240D, 76 300D, http://www.okiebenz.com ------------------------------ Message: 6 Date: Mon, 4 Oct 2010 06:57:26 -0700 (PDT) I believe that would be Super Turbo Diesel, Rolf's website... -Curt Date: Mon, 4 Oct 2010 07:43:18 -0400 ??? <meade.m.dil...@navy.mil> ??? <1370e90cffd2ac4b8cb65267ba10c4b80369d...@naeachrlez02v.nadsusea.nads.navy.mil> ??? Yabut what is "STD"? -Max ------------------------------ Message: 7 Date: Mon, 04 Oct 2010 10:18:47 -0400 We had one here a few years back, I wonder if it was the same one. I remember they had to send a guy over to Wal Mart to buy oil because the airport didn't have enough on hand to top off. Hearing those radial engines wind up was a sound of raw power like I've not heard anywhere else. On Mon, 04 Oct 2010 08:40 -0500, "Kaleb C. Striplin" <ka...@striplin.net> wrote: > There was a fully restored WW2 B17 in town over the weekend. You > could buy a flight on it for $400 if you wanted, but the tours > were free. It was pretty neat to see. I was amazed at the amount > of oil that those big engines appear to leak. About like an old > 617 or something. ------------------------------ Message: 8 Date: Mon, 4 Oct 2010 10:33:36 -0500 Got to admit I feel the same way. My 02 F150 has been pretty reliable but now has 138K miles and although there is much life left, it is tempting to swap to a newer one and not have the issues that will no doubt come on this one. Randy -----Original Message----- I have to say, I'm quickly getting to the point....ok, I'm there, where totally reliable and boring suits me just fine. :-) For a weekend hobby car, I don't mind the odd hick-up or failure. But for daily transport, when I leave the driveway, I expect to return home, without dirty hands. Ya ya, I know, getting old. lol Ed 300E, which is kind of a hobby car now, with a good set of tools in the trunk at all times, just in case. On 1 October 2010 20:26, Kevin Kraly <kr...@comcast.net> wrote: > There's nothing more expen$ive than a cheap Mercedes, or, in my case, RC > truck. A lot of the fun for me is fixing it up. Now what's the fun in > driving something totally reliable and boring where you never get your hands > dirty? > > Kevin in Hillsboro, Oregon > > _______________________________________ > http://www.okiebenz.com > For new and used parts go to www.okiebenz.com > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ------------------------------ Message: 9 Date: Mon, 04 Oct 2010 11:31:34 -0400 Only our cars everything else is fair game. -Rolf On 10/4/2010 8:27 AM, Dillon, Meade M CIV SPAWARSYSCEN-ATLANTIC, 53310 wrote: > Thanks, sounds like a place that doesn't take itself too seriously. > > -Max > > -----Original Message----- > From: mercedes-boun...@okiebenz.com [ mailto:mercedes-boun...@okiebenz.com ] > On Behalf Of Walt Zarnoch > Sent: Monday, October 04, 2010 8:07 AM > To: Mercedes Discussion List > Subject: Re: [MBZ] 617 Manual Flywheel Measurements > > It's SuperTurboDiesel.com > > Happens to be one of the the best places for Benz diesel mayhem that I have > found. > > Walt, who's day started out on the "Where's the darn coffee cup, I need a > triple espresso..." note, and hopefully ends on the "Good news everyone! I've > solved every problem!" note > > On Mon, Oct 4, 2010 at 7:43 AM, Dillon, Meade M CIV SPAWARSYSCEN-ATLANTIC, > 53310<meade.m.dil...@navy.mil> wrote: >> Yabut what is "STD"? >> >> -Max >> >> -----Original Message----- >> From: mercedes-boun...@okiebenz.com >> [ mailto:mercedes-boun...@okiebenz.com ] On Behalf Of Walt Zarnoch >> Sent: Monday, October 04, 2010 3:52 AM >> To: Mercedes Discussion List >> Subject: Re: [MBZ] 617 Manual Flywheel Measurements >> >> Haha, about 5 minutes after I made that post, I realized Winmutt = Rolf, and >> about 20 minutes after that I realized you were user #1, and therefore the >> admin. >> >> Life, she is a fun one to play... >> >> Walt >> >> On Fri, Oct 1, 2010 at 9:54 PM, Walt Zarnoch<zarnoch...@gmail.com> wrote: >>> Something like an infection that you get when you know Rolf and have >>> a Mercedes product... :D >>> >>> Still reading... >>> >>> Walt >>> >>> On Fri, Oct 1, 2010 at 9:46 PM, Dillon, Meade M CIV >>> SPAWARSYSCEN-ATLANTIC, 53310<meade.m.dil...@navy.mil> wrote: >>>> What is STD? Oh - sorry - I wasn't supposed to read the secret message >>>> part, was I!? >>>> >>>> -Max >>>> >>>> ________________________________ >>>> >>>> From: mercedes-boun...@okiebenz.com on behalf of Walt Zarnoch >>>> Sent: Fri 10/1/2010 9:15 PM >>>> To: Mercedes Discussion List >>>> Subject: Re: [MBZ] 617 Manual Flywheel Measurements >>>> >>>> >>>> >>>> I've looked into butterfly, but it doesn't fully fit with what I need to >>>> do. >>>> >>>> I'd much prefer a laptop with Inventor that I can fire up wherever, >>>> and not need to worry about getting cellular/net reception or >>>> dealing with lag. >>>> >>>> Walt >>>> >>>> SECRET MESSAGE TO Rolf! >>>> >>>> Plopped my request for measurements in a new thread on STD, and also >>>> found your thread on the flywheel swap. Mmm... >>>> >>>> On Thu, Sep 30, 2010 at 8:18 PM, Mountain Man<maontin....@gmail.com> >>>> wrote: >>>>> Walt wrote: >>>>>> Inventor 2K11 Pro Educational >>>>>> >>>>>> Does all I need and more. >>>>> I don't play with parts - but I would do that if I had parts to make. >>>>> My son got quite proficient with Inventor 4 years ago working in >>>>> Columbus, OH. >>>>> Also, try butterfly.autodesk.com for cloud cad - I signed up and >>>>> find it a bit slow, but fascinating. CAD on the cloud is where >>>>> they want us all to be someday, charging by the hour or minute of >>>>> time used, or something like that. >>>>> mao >>>>> >>>>> _______________________________________ >>>>> http://www.okiebenz.com/>" target="_new">http://www.okiebenz.com< >>>>> http://www.okiebenz.com/> > For new and used >>>>> parts go to www.okiebenz.com To search list archives >>>>> http://www.okiebenz.com/archive/ >>>>> >>>>> To Unsubscribe or change delivery options go to: >>>>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>>>> >>>> _______________________________________ >>>> http://www.okiebenz.com/>" target="_new">http://www.okiebenz.com< >>>> http://www.okiebenz.com/> > For new and used >>>> parts go to www.okiebenz.com To search list archives >>>> http://www.okiebenz.com/archive/ >>>> >>>> To Unsubscribe or change delivery options go to: >>>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>>> >>>> >>>> >>>> _______________________________________ >>>> http://www.okiebenz.com >>>> For new and used parts go to www.okiebenz.com To search list >>>> archives http://www.okiebenz.com/archive/ >>>> >>>> To Unsubscribe or change delivery options go to: >>>> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>>> >> _______________________________________ >> http://www.okiebenz.com >> For new and used parts go to www.okiebenz.com To search list archives >> http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> >> _______________________________________ >> http://www.okiebenz.com >> For new and used parts go to www.okiebenz.com To search list archives >> http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > _______________________________________ > http://www.okiebenz.com > For new and used parts go to www.okiebenz.com To search list archives > http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > _______________________________________ > http://www.okiebenz.com > For new and used parts go to www.okiebenz.com > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ------------------------------ Message: 10 Date: Mon, 04 Oct 2010 11:34:03 -0400 R A Bennell wrote: > Got to admit I feel the same way. My 02 F150 has been pretty reliable but now > has 138K miles and although there is > much life left, it is tempting to swap to a newer one and not have the issues > that will no doubt come on this one. The problem with 'newer' is that you're buying something that may have deferred maintenance issues that you've already cleared up on the existing truck. (unless you buy something with very little use on it) ------------------------------ _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com End of Mercedes Digest, Vol 59, Issue 12 **************************************** _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
