I ue the generic hose from the FLAPS, IIRC, it's 5/16", but I could be wrong. It usually out-lasts the return lines from Rusty.
On Sat, Oct 8, 2011 at 10:11 PM, Mitch Haley <m...@voyager.net> wrote: > Alex Chamberlain wrote: > >> On Sat, Oct 8, 2011 at 6:58 PM, Mitch Haley <m...@voyager.net> wrote: >> >>> Any reason to get >>> the right stuff instead of just using Weatherhead fuel hose from the >>> FLAPS? >>> >>> >> Does Weatherhead come in metric? >> > > Not at Autozone anyway, and NAPA isn't open on Sunday. > If it's 8mm, SAE/Metric doesn't matter, 5/16 will substitute just fine. > If it's 6mm or 7mm, it might matter, but I'm reasonably certain I could do > a leak free temporary fix with 1/4". > I suppose I could just cut off the old line and disable the car, then I'll > know what size it is. I should have 1/4 and 5/16 in my toolbox already. > Mitch. > > > ______________________________**_________ > http://www.okiebenz.com > For new and used parts go to www.okiebenz.com > To search list archives > http://www.okiebenz.com/**archive/<http://www.okiebenz.com/archive/> > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/**mailman/listinfo/mercedes_**okiebenz.com<http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com> > -- OK Don 2001 ML320 1992 300D 2.5T 1990 300D 2.5T 1997 Plymouth Grand Voyager _______________________________________ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
