So I pulled the pressure relief valve, it seems to move fine, had plenty
of tension so it appears to be working as far as I can tell. Put it back
in, put pan back on, new filter, fresh diesel oil. Pressure pegs when
cold. Ran it for a bit in the driveway got it up to operating temp.
See if you can see this video below. The pressure shown at idle is with
AC on FIY. I rev it up to what I figure is about 2k-3k RPM and it
pegs. Anyway, I am not sure if anything is wrong or not, could just be
low due to gauge, but I think what is showing on the gauge in the video
is at the bottom end of the spec, if it is in fact the actual pressure.
https://www.youtube.com/watch?v=iwBH9206SCQ
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
All posts are the result of individual contributors and as such, those
individuals are responsible for the content of the post. The list owner has no
control over the content of the messages of each contributor.