Yahbut the hole was existing, too big, and I don't have a tap that big... Max Dillon, Charleston SC On May 20, 2014 11:43 AM, "Randy Bennell" <rbenn...@bennell.ca> wrote:
> On 17/05/2014 3:32 PM, Meade Dillon wrote: > >> Pictures of the plate I'll use to pressurize the head while in a heated >> bath. >> >> Max Dillon, >> >> I am coming in late on this so someone else may have already commented, > but would it not have been fairly quick and easy to just thread the hole > and use a bit of teflon tape etc rather than trying to glue the connector > in with JB Weld? > > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > All posts are the result of individual contributors and as such, those > individuals are responsible for the content of the post. The list owner > has no control over the content of the messages of each contributor. > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com All posts are the result of individual contributors and as such, those individuals are responsible for the content of the post. The list owner has no control over the content of the messages of each contributor.
