I've used the sealant that comes with exhaust pipe/muffler patch/repair kits on 
similar applications.  None were turbo, but I doubt the turbo temps would be 
enough higher to make a difference.  I've also found that used gaskets, both 
metal and non-metal, work better if they are carefully wire brushed and then 
used with a sealant.  Also, there seems to be quite a few more sealants at 
FLAPS than in years gone by.  Some may be specific for exhaust level temps.
Gerry

..........................
Meade Dillon wrote:

> Dieselvolk,
> 
> Installing "new" head on my '87 wagon.
> 
> What would be a suitable sealant so I can re-use a metal gasket in a
> high-temperature application?
> 
> Purchased the MB gasket kit, but it does not include the metal gasket for
> the joint where the exhaust manifold "log" (replacement for the soot
> oxidizer) is bolted to the turbo charger.
> 
> EPC says this gasket (352 098 02 80) does not apply to my car, but if I use
> a generic "rest of world" car (i.e. don't plug my VIN into the EPC), then I
> can get the gasket part number.
> 
> Should I go to the trouble of getting the proper gasket, or get some
> sealant to re-use the old gasket?
> 
> 
> 
> -- 
> -------------
> Max
> Charleston SC
> _______________________________________
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> All posts are the result of individual contributors and as such, those 
> individuals are responsible for the content of the post.  The list owner has 
> no control over the content of the messages of each contributor.
> 
> 
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4765 / Virus Database: 4025/8240 - Release Date: 09/19/14
> 


-- 
arche...@embarqmail.com <arche...@embarqmail.com>

_______________________________________
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

All posts are the result of individual contributors and as such, those 
individuals are responsible for the content of the post.  The list owner has no 
control over the content of the messages of each contributor.

Reply via email to