Thanks for the input! I will be looking at these other items in the next few days and making a determination.
Michael E. Esh 231 286 2344 > On Oct 20, 2014, at 1:51 PM, Curly McLain via Mercedes > <mercedes@okiebenz.com> wrote: > > Yes! As do worn LCA bushings > > >> Good point, Jim. I had forgotten about subframe mounts. However, would >> subframe mount make the whole rear of the car low, and not be relative to >> the load? >> >> On a related issue, spring pads are of different sizes. You have to look at >> the edges to see how many tabs or notches they have. This identifies the >> thickness. You should see some very distinct little tabs or pins sticking >> out from the edge. This allows you to identify which thickness you have so >> the pad doesn't have to be removed to determine which size it is. >> >> Dan >> >> Sent from my iPad >> >>> On Oct 20, 2014, at 11:47 AM, Jim Cathey <jim.cathey...@gmail.com> wrote: >>> >>> Spring pads can pack down and wear out. There are other >>> things besides weak springs that can cause rear geometry >>> problems. Rear subframe bushings? >> > -- Jim >> > > > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > All posts are the result of individual contributors and as such, those > individuals are responsible for the content of the post. The list owner has > no control over the content of the messages of each contributor. _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com All posts are the result of individual contributors and as such, those individuals are responsible for the content of the post. The list owner has no control over the content of the messages of each contributor.
