Or tap it out with a bunch, or grind it out with a small die grinder, or maybe
get lucky and have it break beating on it with a small punch...
Lots of options, none of them all that easy.
Actually is it an aluminum casting? Check out AVE on youtube, he recently
showed how to use alum to dissolve a steel bolt in an aluminum casting.
-Curt
From: Meade Dillon via Mercedes <mercedes@okiebenz.com>
To: Mercedes Discussion List <mercedes@okiebenz.com>
Cc: Meade Dillon <dillonm...@gmail.com>
Sent: Sunday, February 7, 2016 2:29 PM
Subject: Re: [MBZ] From bad to worse to nightmare
Spot weld a bolt to the broken tap, then you can back it out?
-------------
Max
Charleston SC
On Sun, Feb 7, 2016 at 2:09 PM, Kaleb C. Striplin via Mercedes <
mercedes@okiebenz.com> wrote:
> No there must be a better answer than that
>
>
>
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
