Should have pullled it while you could still turn it. Try giggling it while turning to see if you can get it to move one last time to pull it out then use a screw driver to start it until the new one comes in
Sent from my iPhone > On Oct 13, 2016, at 5:57 PM, Robert Massmann via Mercedes > <mercedes@okiebenz.com> wrote: > > Well I have a problem with my ignition switch when I got home tonight. I had > trouble turning the switch to the off position, I had to apply unusual > pressure to get it to the off position. Yes the transmission lever was in the > park position. I put the key back in and tried to turn it to the accessory > position, but it wouldn’t turn at all. I tried my spare key with the same > result, could not turn it out of the off position. Will need to see if I can > the whole assembly out. Is there a way to get the tumbler set out besides > turning it to release position to insert the release pin. > > Not sure what I need to do next? I guess it is possible to wear the switch to > a none work condition. > > Bob Massmann > 1995 E300D 448,000 miles > _______________________________________ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
