MG via Mercedes <mailto:mercedes@okiebenz.com>
March 20, 2017 at 5:36 PM
If you can I would go ahead and stretch the spring first just to see
if it helps. It takes 10 min. to take the spring cover bolt loose from
the top of the banjo bolt on the engine side of the pump. Hold the
banjo bolt with a 17mm wrench and use a 14mm to loosen the plug, you
don't have to take the whole banjo bolt out, the spring is a very weak
spring so that isn't any problem even after it's stretched. Just don't
drop the little copper sealing ring. (OR THE BALL!)
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
