I finally messed with it the right way. The trick is to push down on the female socket tab, not lift it. I was able to get it apart with only 2 hands :-). Tested the sensor and it looks ok (maybe).
<https://www.dropbox.com/s/2ac9eeab84djts2/Wheel%20Speed%20Sensor%20Test%20RF.jpg?dl=0> Greg -----Original Message----- From: Mercedes [mailto:mercedes-boun...@okiebenz.com] On Behalf Of Curley McLain via Mercedes Sent: Sunday, December 23, 2018 3:24 PM To: Greg Fiorentino via Mercedes Cc: Curley McLain Subject: Re: [MBZ] Help with ML320 speed sensor connector? On the Dogdes, I just cut off the keeper as they are nearly impossible to hold open while you pull the connector apart. It takes 3 hands and I only have 2. Dunno what the plug us like on your car, but there has to be a way. Greg Fiorentino via Mercedes wrote on 12/23/18 4:50 PM: > Anybody happen to know how to remove the RF wheel sensor connector without > destroying the connectors? It's an '02, the connector to the electrical > system, not the wheel. There's a catch on the sensor cable; do I just use a > small flat screwdriver to free the catch, then pull? It doesn't seem to want > to pull free and I'd prefer not to break anything. > > > > Anybody BTDT? > > > > Greg > _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com