I went out before it got too dark (twilight helped see the LED) and
hooked up my LED blinker reader to the car and pulled codes off 4 pins.
Had time to test/ get codes off pin5 LH Sequential Fuel Injection Left
Bank, pin6 ABS/ASR/ETS/ESP, pin8 Base Module, and pin11 Automatic Damper
System control module. There are a bunch more pins too, maybe 24 total
that are used on this car (I still need to check on that). I will get to
them another time, I have to modify my wires with something that will go
into the sockets better.
Got 1 code off the LHSFI, 2 off the ABSetc., 8 codes off the Base
Module, 5 off the ADS. Gotta dig more into what they might mean, I did
look to see what the codes are for. I can go back and clear all of them
too, see what might come back. A bunch of the BM codes seemed to be due
to the battery being low or disconnected, so those should clear which I
can do with the blink reader too.
I *think* I found all the codes for all the pins/blinks, and have sorta
compiled those from stuff I extracted from various sources, but I think
I will make another cheat sheet to see more easily what they all mean
and what pins are what. One of the fancy devices would probably read
them all and say what they are directly, but for now my no-cost LED
blinker is working, Yay me!
Fun times with an electronic car...
BTW the 38-pin connector is on these cars, certain years seem to have
different set-ups for the pins and what they have on them so you have to
look at car/year specific pins/codes.
38-Pin Diagnostic Connector
Models 124.034/036, 129.058/063/067/076,
140, 170, 202, 208, 210, 215, 220
--
--FT
_______________________________________
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
