On Tue, 9 Jul 2019 10:32:28 -0400 Meade Dillon via Mercedes <mercedes@okiebenz.com> wrote:
> Karl - like Craig, I never saw this post. And it is not in the archives ... Craig > On Tue, Jul 9, 2019 at 10:28 AM Karl Wittnebel via Mercedes < > mercedes@okiebenz.com> wrote: > > > > The link should appear below. > > > > > >> VViViD 3M Clear Extra-Wide Headlight Protective Scratch-Proof > > >> Wet-Apply Tint Vinyl Wrap Film 15" x 48" Roll Including Hard > > >> Detailer Squeegee > > >> https://www.amazon.com/dp/B0728HQ3J7/ref=cm_sw_r_cp_apa_i_BTwiDbGWZH77T > > >> > > >> Dont try to wrap around the edges of the lenses. Just do up to the > > >> edge of the flat part. > > >> > > >> Clean the lens really well before starting. > > >> > > >> I just overlaid the material onto the lens with backing side up > > >> and used a crayon on its side to transfer the edges of the lens to > > >> the backing. > > Cut > > >> film out with scissors, peel one corner free, wet the mating > > >> surfaces > > with > > >> windex or similar and then progressively wet and peel and squeegee > > >> the bubbles out to stick it down to the lens. Repeat. > > >> > > >> It comes with instructions or a link I think. _______________________________________ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com